Devo6 -> Pitch curve -> Invalid ini

Start
Prev
1
Next
End

wluijk
Topic Author
Offline

27 Jun 2013 21:10 - 27 Jun 2013 21:11 #11470 by wluijk

Devo6 -> Pitch curve -> Invalid ini was created by wluijk

Hello. I am new here. What do i need to do? I have file access to the TX and v3.0.0 is loaded.

Last edit: 27 Jun 2013 21:11 by wluijk.

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

28 Jun 2013 05:08 #11489 by rbe2012

Replied by rbe2012 on topic Devo6 -> Pitch curve -> Invalid ini

If you have a tx and deviation is running you should be fine.

Ok, to be serious: I can not recognize which kind of problem you have. Please tell us more about the config you want to build, the config you have and what does not work as expected.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

28 Jun 2013 05:19 - 28 Jun 2013 05:20 #11490 by vlad_vy

Replied by vlad_vy on topic Devo6 -> Pitch curve -> Invalid ini

Possible firmware v3.0 is loaded, but filesystem not rewrited/renewed.

Last edit: 28 Jun 2013 05:20 by vlad_vy.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.027 seconds