Expert mode to standard mode

Start
Prev
1
Next
End

chrlsdim
Topic Author
Offline

11 Aug 2013 15:08 #12909 by chrlsdim

Expert mode to standard mode was created by chrlsdim

Hi,

if i pass from expert mode to standard mode the model is reinitialized...

it's not cool !! it's normal ?

regards.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

11 Aug 2013 15:15 - 11 Aug 2013 15:16 #12910 by PhracturedBlue

Replied by PhracturedBlue on topic Expert mode to standard mode

It should only happen after you confirm the dialog box. do you not get the dialog? It is possible there is a bug in the logic that detects whether your model is compatible to standard or not, but I'd need to see a model.ini that has this issue, since when I try it, it works as expected.

But yes, the standard gui is not compatible with most advanced models

Last edit: 11 Aug 2013 15:16 by PhracturedBlue.

Please Log in or Create an account to join the conversation.

Xermalk
Offline

12 Aug 2013 21:28 #12933 by Xermalk

Replied by Xermalk on topic Expert mode to standard mode

PhracturedBlue, you might want to add a note about making a backup before swapping from standard to expert. In the dialog box that shows up.

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

23 Aug 2013 12:19 #13182 by rbe2012

Replied by rbe2012 on topic Expert mode to standard mode

My opinion: it should be clearly referred to in the manual, but not in the dialog.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.029 seconds