vlad_vy wrote: Russian don't help, I've read this at russian forum.
As I can understand:
1) switch as the source for channel (e.x. AUX2) = autolevel signal,
2) the same switch used for pitch = 0%,
3) 0.5-1 second later, pitch restored to 50-70%.
Still not clear...
Do you mean, that there is a switch to control something, but when it is switched it should set an other channel to a specified value for some time, but don't effect it after that? Should it set that value when it is changed to any direction, or just whet it is turned on?
You could use something similar to Fabien's sawtooth generator, and form the one time only started saw to a switch value:
www.deviationtx.com/forum/7-development/...rs-to-channels#13834
