MiniCP - Can't bind

Start
Prev
1
Next
End

Krejzi
Topic Author
Offline

28 Nov 2013 20:17 #15995 by Krejzi

MiniCP - Can't bind was created by Krejzi

Hi everyone again.

about half or maybe more year ago I got my MiniCP and Devo7E with +2 switch mod.
It worked without problems, with my Blade Nano and MiniCP.
After I smashed my Mini and Nano, so I gave up for a while with helis.
Now I fixed my MiniCP, but there is a problem I can't bind Mini at all.

On original firmware works without problem, I tried older Deviation firmwares and 3.0 and nothing and actually I have no idea what to do.

Help anyone ?

)

Please Log in or Create an account to join the conversation.

FDR
Offline

28 Nov 2013 20:34 #15996 by FDR

Replied by FDR on topic MiniCP - Can't bind

If you used auto binding with the stock fw, you should clear the fixed id in deviation on the model setup page.
However if you used fixed id, the same id should work with stock and deviation too...

Please Log in or Create an account to join the conversation.

Krejzi
Topic Author
Offline

28 Nov 2013 20:56 #15999 by Krejzi

Replied by Krejzi on topic MiniCP - Can't bind

omg. sorry about that, but I'm pretty sure I had default ID before and it worked, but without ID it works again. Thanks a lot

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.081 seconds