- Posts: 17
Problema serio no DEVO 12s
- cristofer20
- Topic Author
- Offline
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
I saw this radio uses this flash www.digikey.com/product-detail/en/STM32F.../497-6442-ND/1852092
has a jumper beside someone already tried to make a flash with it jumpered? What does that jumper? zero setup? I've seen that has a connection jumper, straight to Flash ... someone could give a hint? Thank you!
Please Log in or Create an account to join the conversation.
- HappyHarry
- Offline
- Posts: 1136
do you want to install deviation 4.0.1?
do you want to install the original walkera devention?
list the steps you have taken to try and do what you are wanting one by one.
also why do you think there is a problem inside the transmitter?
Please Log in or Create an account to join the conversation.
- vlad_vy
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
HappyHarry wrote: i don't understand what it is that you are trying to do
do you want to install deviation 4.0.1?
do you want to install the original walkera devention?
list the steps you have taken to try and do what you are wanting one by one.
also why do you think there is a problem inside the transmitter?
hello friend, thanks for answering, already tried to install the 4.0.1 version my radio, but he's a blue screen every time I turn, now when I try to install the factory firmware, it gets black lcd no light, and only with a light from power on (red light). The only firmware that it works and I have access to the software and the USB mode to copy the files to the root system, the deviation is 3.0 firmware only one that works on my radio, all others fail ....
I opened the radio to see if he had any electronics problem component, all measures are all no problem ...
Please Log in or Create an account to join the conversation.
- FDR
- Offline
If a v3.0 works on your tx, all deviation versions should, and also the stock fw too...
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
FDR wrote: Make sure you install the library and filesystem appropriate to the firmware version.
If a v3.0 works on your tx, all deviation versions should, and also the stock fw too...
Hello friend it on the site walkera pro 12s you only 2 models a version for the 100mw and 10mw for another B, already tried both, same symptom so the radio turns on and gets the red LED on the battery it is 100% charged, already tried other USB ports, another computer with windows xp, installed the manual drive and also did not work ... I do everything according to the manual first install the firmware, then the libray file and yet when tenteo call it, nothing appears on the screen, no light on LCD ...
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
1st pass the firmware by Dfuse
2nd Libray
3 Hold ENT + Power button to enter Download Mode to copy files, the problem starts exactly th ...
4 blue screen of death, I can not any more, not open USB
5 Back to deviation 3.0
6 Do all of the above
7 My radio works ... I do not understand!
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
Deviation 3.0 USB mode works perfectly
Please Log in or Create an account to join the conversation.
- HappyHarry
- Offline
- Posts: 1136
deviation-devo12-v4.0.1.dfu
which is installed using the dfuse 'firmware' tab and using the upgrade button
and
devo12-lib.dfu
which is installed using dfuse 'library' tab, also using the upgrade button
both of these files are inside the below zip file
www.deviationtx.com/repository/Deviation...n-devo12-v4.0.1.zip/
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
HappyHarry wrote: when installing 4.0.1 are you using the dfu and the library file from the same zip file?
deviation-devo12-v4.0.1.dfu
which is installed using the dfuse 'firmware' tab and using the upgrade button
and
devo12-lib.dfu
which is installed using dfuse 'library' tab, also using the upgrade button
both of these files are inside the below zip file
www.deviationtx.com/repository/Deviation...n-devo12-v4.0.1.zip/
Yes friend that I've ever done, and not of right, step when the 4.0.1 firmware deviation'm not able to get more in USB mode to play the system files inside the USB root
Please Log in or Create an account to join the conversation.
- vlad_vy
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
vlad_vy wrote: Are you sure that you always do 'UPGRADE' library file, and not 'UPLOAD'? If you once did 'UPLOAD' library, you rewrite/corrupt you library file, and need download it again, and try 'UPGRADE'.
Hello friend thanks for the reply, but always at the Libray Upgrade, do not upload, If I had done the Upload file which would have to send it again? tell me his name? thank you! I'm talking about the 4.0.1 zip deviation
Please Log in or Create an account to join the conversation.
- henkerhaus
- Offline
- Posts: 50
This usually happens when the file system is copied over exactly as downloaded, which includes two folder levels that aren't needed when installed on the transmitter i.e. the top level called 'filesystem' and the next level labeled as the devo12 (or devo8, devo10, etc., depending on which version your have).
Only copy the files inside the Devo12 folder to the transmitter, not the filesystem folder, or the devo12 folder itself.
Please Log in or Create an account to join the conversation.
- vlad_vy
- Offline
- Posts: 3333
www.deviationtx.com/repository/func-startdown/1216/
Unpack archive and do 'UPGRADE' 'deviation-devo12-v4.0.1.dfu' at Dfuse 'Firmware' tab and 'devo12-lib.dfu' file at Dfuse 'Library' tab.
The same thing for original Walkera firmware, download firmware archive again and 'UPGRADE' firmware and library.
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
henkerhaus wrote: A blank screen after installing Deviation in my experience is usually due to an improperly installed file system, i.e. the firmware isn't finding the file system where it expects it to be.
This usually happens when the file system is copied over exactly as downloaded, which includes two folder levels that aren't needed when installed on the transmitter i.e. the top level called 'filesystem' and the next level labeled as the devo12 (or devo8, devo10, etc., depending on which version your have).
Only copy the files inside the Devo12 folder to the transmitter, not the filesystem folder, or the devo12 folder itself.
Thanks buddy, I'll do that now to see if it will work, since morning I'm trying everything you can imagine! thank you for your attention! Have put the results! Sincerely
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
cristofer20 wrote:
henkerhaus wrote: A blank screen after installing Deviation in my experience is usually due to an improperly installed file system, i.e. the firmware isn't finding the file system where it expects it to be.
This usually happens when the file system is copied over exactly as downloaded, which includes two folder levels that aren't needed when installed on the transmitter i.e. the top level called 'filesystem' and the next level labeled as the devo12 (or devo8, devo10, etc., depending on which version your have).
Only copy the files inside the Devo12 folder to the transmitter, not the filesystem folder, or the devo12 folder itself.
Please Log in or Create an account to join the conversation.
- cristofer20
- Topic Author
- Offline
- Posts: 17
cristofer20 wrote:
cristofer20 wrote:
henkerhaus wrote: A blank screen after installing Deviation in my experience is usually due to an improperly installed file system, i.e. the firmware isn't finding the file system where it expects it to be.
This usually happens when the file system is copied over exactly as downloaded, which includes two folder levels that aren't needed when installed on the transmitter i.e. the top level called 'filesystem' and the next level labeled as the devo12 (or devo8, devo10, etc., depending on which version your have).
Only copy the files inside the Devo12 folder to the transmitter, not the filesystem folder, or the devo12 folder itself.
Please Log in or Create an account to join the conversation.
- Home
- Forum
- News, Announcements and Feedback
- Feedback & Questions
- Problema serio no DEVO 12s