Cant get pitch to work on rx2701 / copterx 3x1000

Im stumped! I cant get the pitch to work on my 450. It was setup and flying great using my 2801 pro tx, but now that im using devo10 deviation 4.01, the pitch wont work on 1 servo mode.
Im binding in 2601 protocol, and in standard mode.
If I change from the required 1 servo swash mode, two servos move. This is no use, as the gyro needs a 1 servo swash or no mix to work as all mixing is done in the gyro.

Please help me......

Just tried the motor, and the throttle is working great, still cant get pitch....

Ive tried every combination possible in advanced, and cant get channel 6 to do anything.
Have ripped an rx2801 out of another model and its now working. Suppose its time to buy some DSM2 rx's, and relegate the 2701 to planes.