- Posts: 706
Need a little help please...
- magic_marty
- Topic Author
- Offline
Less
More
20 Feb 2014 07:28 #20638
by magic_marty
Need a little help please... was created by magic_marty
i just got a walkera qrx350 with a spektrum ar6210 rx in it and i need help setting up the model file i havent used my tx in a while and i am really rusty...i got it to bind and i can arm and disarm the motors but i can't figure out how to set up the 3 position switch for the flight modes..any help would greatly appreciated ...
Please Log in or Create an account to join the conversation.
- Kdean
- Offline
Less
More
- Posts: 213
20 Feb 2014 07:52 #20639
by Kdean
Replied by Kdean on topic Need a little help please...
You might find what your looking for here:
www.deviationtx.com/forum/model-configs/...x350-v1-2-on-devo-8s
www.deviationtx.com/forum/model-configs/...x350-v1-2-on-devo-8s
Please Log in or Create an account to join the conversation.
- magic_marty
- Topic Author
- Offline
Less
More
- Posts: 706
20 Feb 2014 10:09 #20645
by magic_marty
Replied by magic_marty on topic Need a little help please...
tried that one and my tx keeps turning off and on with it don't know why...but i thing i got it working but can't get failsafe working i have tried everything i could think of...what i need it to do is when it looses signal it needs to activate RTH which is mapped to Fmod switch02 which is on ch5 not sure how to get it to work...i experimented trying failsafe with other channels and couldn't get them to work eather...im stumped...
Please Log in or Create an account to join the conversation.
Time to create page: 0.025 seconds
- Home
- Forum
- News, Announcements and Feedback
- Feedback & Questions
- Need a little help please...