RX-2702V Gyro Problem

Im rebuilding my v450d01 and just went through all the mechanical/swash/RX setup. I just checked my gyro direction and everything is good except the aileron direction. I tried reversing the setting using the little switch on the RX but it does not change anything. When I tilt the heli Left the swash plate tilts Left (not good....). Any ideas? The rudder and Elevator reverse switches seem to work when I change them.

If you reverse it in the tx does that resolve the issue?

I never had much luck with my RX2702V.Upgraded to the RX2703V-D and its perfect.

Might be worth watching this too -http://youtu.be/BUnak6YDdGc