stop prop timer

Start
Prev
1
Next
End

SilbernerSurfer
Topic Author
Offline

22 Nov 2015 02:08 #40284 by SilbernerSurfer

stop prop timer was created by SilbernerSurfer

Hello together!

I want to configure a timer as stop-prop.

I have done this before but I have forgotten how it works.

It starts fast at -100% and gets slower or stops at 0% throttle. Then it gets faster at 100% throttle. I want to have it starting slow at -100% and getting faster up to 100% throttle.
As far as I remember I need a virtual switch.

Can someone help me out please!

Thanks in advance

Uwe

Please Log in or Create an account to join the conversation.

mwm
Offline

22 Nov 2015 05:42 #40288 by mwm

Replied by mwm on topic stop prop timer

use a virtual channel as the prop control channel. Src is your throttle channel (either stick or output, depending on what you want). Scale is -100.

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

SilbernerSurfer
Topic Author
Offline

22 Nov 2015 12:21 - 22 Nov 2015 12:21 #40295 by SilbernerSurfer

Replied by SilbernerSurfer on topic stop prop timer

I cant get it working with scale -100.

I have used Virt1 as source at the stop-prop.

At the virtual switch I have:
Simple
Src: Thr
Curve: 1-to-1
Scale: -58
Offset: -58

It seems too work!

Would you kindly describe how I can set it up with Scale: -100 as you mentioned above?

Last edit: 22 Nov 2015 12:21 by SilbernerSurfer.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.043 seconds