Question about Ch3-Popup while turning on.

Start
Prev
1
Next
End

HansT
Topic Author
Offline

10 Mar 2016 08:14 #44358 by HansT

Question about Ch3-Popup while turning on. was created by HansT

Hello,
I am running a DEVO7E with deviationtx. On my model I have PPM selected because I use TBS Crossfire as TX-Module. When I turn on the TX the Screen shows "Ch3 is 0%" "OK". Can I change this to Ch4? I can't find where to set this Parameter. I use Mode1.
Thank you,
Hermann

Please Log in or Create an account to join the conversation.

mwm
Offline

10 Mar 2016 09:14 #44362 by mwm

Replied by mwm on topic Question about Ch3-Popup while turning on.

Documents in the online manual linked to the left hand menu as the safety section. You have to edit it on the USB drive, not the transmitter.

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

HansT
Topic Author
Offline

10 Mar 2016 09:34 #44365 by HansT

Replied by HansT on topic Question about Ch3-Popup while turning on.

Thank you, that helped and works fine now,
Hermann

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.032 seconds