Hello fans,
I have the Devo7e with the Deviation firmware Devo7e v4.0.0.1 and also a 3in1 modules soldered.
With version v4.0.0.1 all four modules work.
After the Deviation firmware Version 5 on the Devo7e flashed, the Devo7e missing three modules.
Hardware.ini I have set as described in the numerous forums.
V4.0.0.1 tx.ini
current_model=1
mode=2
[modules]
enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = A15
has_pa-nrf24l01 = 1
V5.0 Hardware.ini
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = A15
has_pa-nrf24l01 = 1
; enable-multimod = A13
What am I doing wrong?
