- Posts: 216
How to upgrade with Devo 12S
28 Mar 2017 16:59 - 31 Mar 2017 12:26 #60861
by saidem
Please Log in or Create an account to join the conversation.
29 Mar 2017 07:46 - 29 Mar 2017 08:40 #60894
by saidem
Please Log in or Create an account to join the conversation.
31 Mar 2017 12:52 - 31 Mar 2017 13:09 #60978
by saidem
Replied by saidem on topic How to upgrade with Devo 12S
Hello
For the passage of my Devo 12S under Deviation, I took the file Devo 12, I think it's OK. I used version 5.0.0 and also a nighty. I replaced my Dfuse version by this one v2.31 - October 6, 2014. I added in my computer the driver STM32 DFU windows 10, but I still have the same problem.
The first dev file upgrade deviation-devo12-v5.0.0 goes well, the second devo12-lib loads, but there is an error message that appears by pressing upgrade. Here are the photos. Do you have any idea what's going wrong?
Here is a photo of the files, do you have the same sizes?
Maybe the file is not good, what do you think?
For the passage of my Devo 12S under Deviation, I took the file Devo 12, I think it's OK. I used version 5.0.0 and also a nighty. I replaced my Dfuse version by this one v2.31 - October 6, 2014. I added in my computer the driver STM32 DFU windows 10, but I still have the same problem.
The first dev file upgrade deviation-devo12-v5.0.0 goes well, the second devo12-lib loads, but there is an error message that appears by pressing upgrade. Here are the photos. Do you have any idea what's going wrong?
Here is a photo of the files, do you have the same sizes?
Maybe the file is not good, what do you think?
Please Log in or Create an account to join the conversation.
31 Mar 2017 17:01 - 31 Mar 2017 17:04 #60989
by saidem
Replied by saidem on topic How to upgrade with Devo 12S
Thanks vlad_vy, I should have read this a little closer, because it was nevertheless well marked on the manual. But my English is not very good.
I received the 4 in 1 module from Banggood and what's bizarre when I edit the hardware.ini file under notpad ++ I have only one line. I'll make you a copy. And if I copy a good file, it goes back on a single line.
I received the 4 in 1 module from Banggood and what's bizarre when I edit the hardware.ini file under notpad ++ I have only one line. I'll make you a copy. And if I copy a good file, it goes back on a single line.
Please Log in or Create an account to join the conversation.
26 Mar 2018 04:41 #68356
by christodoulou
Replied by christodoulou on topic How to upgrade with Devo 12S
Thnx for the reply but as there was 2 files version 5 one emu and one other i didnt know from the 2 which one?
There is not any one file says that is for devo 12s just devo 12
Regarding other features as you said voice and more how i can chose the right one for devo 12 s and not for devo 12?
Also can i bind spektrum/jr receivers with my devo 12s after upgrade?what is the right file to do that and how as i use dfuse usb tool with windows 10
Thnx in advance
There is not any one file says that is for devo 12s just devo 12
Regarding other features as you said voice and more how i can chose the right one for devo 12 s and not for devo 12?
Also can i bind spektrum/jr receivers with my devo 12s after upgrade?what is the right file to do that and how as i use dfuse usb tool with windows 10
Thnx in advance
Please Log in or Create an account to join the conversation.
Time to create page: 0.128 seconds
-
Home
-
Forum
-
News, Announcements and Feedback
-
Feedback & Questions
- How to upgrade with Devo 12S