×

Notice

The forum is in read only mode.
  1. Forum
  3. General
  5. General Discussions
  7. CCPM?

CCPM?

More
08 Mar 2013 15:42 #7531 by SQRTneg2
CCPM? was created by SQRTneg2
How do you set up a FB heli? There is a Cyclic1, 2, and 3 curve, are these used? There are no settings under these. Am I missing something?
Abandoned WK2801Pro user
More
08 Mar 2013 16:00 - 08 Mar 2013 16:04 #7532 by FDR
Replied by FDR on topic CCPM?
We use 3 virtual channels (under the real ones) to prepare the values for the mixing.

(EDIT: The Cyclic 1, 2, 3 are the outputs of the mixing, they go directly to the channels...)

Load the "6Ch Helicopter" template, and look how it does...
Last edit: 08 Mar 2013 16:04 by FDR.
More
08 Mar 2013 18:01 #7534 by domcars0
Replied by domcars0 on topic CCPM?

SQRTneg2 wrote: How do you set up a FB heli? There is a Cyclic1, 2, and 3 curve, are these used? There are no settings under these. Am I missing something?

Did you read the User Manual (from the page 26) ?
Devo 10 (+7e) owner. It's mine, please don't touch it with your big fingers :angry:
More
09 Mar 2013 01:19 #7545 by SQRTneg2
Replied by SQRTneg2 on topic CCPM?
P26 just has some stuff about setting alarms. Most of the page is blank.
Abandoned WK2801Pro user
More
09 Mar 2013 05:01 #7547 by stevecox
Replied by stevecox on topic CCPM?
Check you are in the correct manual?

www.deviationtx.com/user-manual
Adelaide
More
09 Mar 2013 14:48 #7554 by SQRTneg2
Replied by SQRTneg2 on topic CCPM?
Ah, There are two manuals! I see now. Thanks!

Silly me!
Abandoned WK2801Pro user
More
04 Jul 2015 11:59 - 05 Jul 2015 08:49 #35092 by Thomas.Heiss
Replied by Thomas.Heiss on topic CCPM?
Collective / Pitch with 4 predefined pitch curves is the 3rd virtual channel "CYC-COL".

The other two virtual channels are CYC-AIL and CYC-ELEV.
To these channels the stick inputs AIL AND ELE(v) are assigned.
Expo and DualRate are to be setup on those virtual channels.


BTW: I run into the Cyclic1 and Cyclic2 wrong assignment for AIL and ELEV channels (DSMx).

Thread including link Mantis bugtracker #0000624: www.deviationtx.com/forum/6-general-disc...ngs-for-flybar#35089

Thomas
Last edit: 05 Jul 2015 08:49 by Thomas.Heiss.
  1. Forum
  3. General
  5. General Discussions
  7. CCPM?
Time to create page: 0.809 seconds
Powered by Kunena Forum
Force desktop display