- Posts: 53
Binding issue with Devo rx's on my 8s w/4.0
06 Jan 2014 05:51 #18043
by Keith5031
Hey guys, I can't seem to get any of my devo rxs to bind with my 8s. I did get Flysky, DSM2 and a Tactic SLT, but no luck with the devo rxs, 6 or 8 channel ones. I must be doing something wrong.
Binding issue with Devo rx's on my 8s w/4.0 was created by Keith5031
Hey guys, I can't seem to get any of my devo rxs to bind with my 8s. I did get Flysky, DSM2 and a Tactic SLT, but no luck with the devo rxs, 6 or 8 channel ones. I must be doing something wrong. Please Log in or Create an account to join the conversation.
07 Jan 2014 21:20 #18160
by Keith5031
Replied by Keith5031 on topic Binding issue with Devo rx's on my 8s w/4.0
Hey guys, I reinstalled 4.0 and also 4.0.1 with no luck in getting any of my Devo rxs to bind. I did bind somemore Flysky and DSM2 rxs and it went fine. I also was able to put in a bug issue, hope I did it right. Right now 
it's not a big deal, weather not cooperating and all. I appreciate everyone's effort in trying to get this figured out for me, I don't know if anyone else has had this problem or not and if they found a solution that worked.
it's not a big deal, weather not cooperating and all. I appreciate everyone's effort in trying to get this figured out for me, I don't know if anyone else has had this problem or not and if they found a solution that worked. Please Log in or Create an account to join the conversation.
08 Jan 2014 04:40 #18186
by Keith5031
Hey everyone, SUCCESS! I opened up the Tx and re-checked everything like HappyHarry suggested. I found a spot between pins 3 and 4 on the Devo chip where I soldered. It looked like I may have joined those two at the base with just alittle solder. I scraped until I could see no more solder. Tried it again and got an 8 channel and 6 channel rx to bid right off with clearing the rx and the id and to the Devo protocol, not any below that. I will try the others, but am happy that I got it to work thanks to you guys and your suggestions. I really do appreciate it. 
Thanks Everyone. 
Replied by Keith5031 on topic Binding issue with Devo rx's on my 8s w/4.0
Hey everyone, SUCCESS! I opened up the Tx and re-checked everything like HappyHarry suggested. I found a spot between pins 3 and 4 on the Devo chip where I soldered. It looked like I may have joined those two at the base with just alittle solder. I scraped until I could see no more solder. Tried it again and got an 8 channel and 6 channel rx to bid right off with clearing the rx and the id and to the Devo protocol, not any below that. I will try the others, but am happy that I got it to work thanks to you guys and your suggestions. I really do appreciate it. Thanks Everyone. Please Log in or Create an account to join the conversation.
08 Jan 2014 16:55 #18226
by HappyHarry
Replied by HappyHarry on topic Binding issue with Devo rx's on my 8s w/4.0
just for future reference please include all pertinent info in your forum posts, if i'd not read your bitbucket issue i wouldn't have known you'd done any module additions, and i wouldn't have thought to suggest looking there for the problem
Please Log in or Create an account to join the conversation.
08 Jan 2014 21:59 #18249
by Keith5031
Guys, it's not a question weather or not I posted enough info or what I posted implied I had done any mods or not. It is the fact I had a problem and all of you helped me figure it out and fix it. Many thanks to all of you.
Replied by Keith5031 on topic Binding issue with Devo rx's on my 8s w/4.0
Guys, it's not a question weather or not I posted enough info or what I posted implied I had done any mods or not. It is the fact I had a problem and all of you helped me figure it out and fix it. Many thanks to all of you. Please Log in or Create an account to join the conversation.
Time to create page: 0.069 seconds
-
Home
-
Forum
-
General
-
General Discussions
- Binding issue with Devo rx's on my 8s w/4.0