- Posts: 7
Devo 7e v4.0.1 and Hobsan X4 H107L Binding issue
- droople
- Topic Author
- Offline
I got my Devo 7e today, and installed Deviation 4.0.1 and added the V911 TX radio module.
I am trying to bind my Devo 7e and Hobsan X4 107L, but it shows binging and never get banded.
I'm a noob on the transmitter, I'm not sure are there any model/protocol file for H107L I could download.
Thank you in advance
Please Log in or Create an account to join the conversation.
- John-Boy
- Offline
- Posts: 65
www.deviationtx.com/forum/6-general-disc...-bind-problems#18402
Here's a Hubsan config:
www.deviationtx.com/forum/model-configs/1227-hubsan-x4-config
Good Luck...
Please Log in or Create an account to join the conversation.
- droople
- Topic Author
- Offline
- Posts: 7
John-Boy wrote: Don't forget to edit the tx.ini file and enable the a7105 module. Then look here for more ideas:
www.deviationtx.com/forum/6-general-disc...-bind-problems#18402
Here's a Hubsan config:
www.deviationtx.com/forum/model-configs/1227-hubsan-x4-config
Good Luck...
thank you John, I checked the both threads and loaded the config,but still no luck
here is my tx
[modules]
enable-cyrf6936=B12
has_pa-cyrf6936=1
enable-a7105=A13
has_pa-a7105=1
enable-cc2500=None
has_pa-cc2500=0
enable-nrf24l01=A14
has_pa-nrf24l01=1
Please Log in or Create an account to join the conversation.
- John-Boy
- Offline
- Posts: 65
Try this:
[modules]
enable-cyrf6936=B12
has_pa-cyrf6936=1
enable-a7105=A14
has_pa-a7105=1
enable-cc2500=None
has_pa-cc2500=0
enable-nrf24l01=A13
has_pa-nrf24l01=1
Later....
Please Log in or Create an account to join the conversation.
- Daryoon
- Offline
- Posts: 260
The TMS or the TCK point.
TMS = A13
TCK = A14
Read my post here and pay attention towards the end where I talk about that.
www.hacksmods.com/2013/05/nrf24l01-devo7e-pinout/
Please Log in or Create an account to join the conversation.
- droople
- Topic Author
- Offline
- Posts: 7
I found the reason is that I did put a7105 chip on the board
Now it was fixed.
But the Aile controls the rolling leftward and rightward, and Elev controls the forward and backward. It's the opposite way I want.
Could you tell me how to swap the control between Aile and Elev?
Please Log in or Create an account to join the conversation.
- John-Boy
- Offline
- Posts: 65
Maybe you want to try it as is so you will be ready for other aircraft that follow standard control layouts?
If not, follow the directions of the Advanced GUI. Select Channel #1 and change its source from Aileron to Elevator. Then change Channel #2 source to Aileron.
Good luck?
Please Log in or Create an account to join the conversation.
- droople
- Topic Author
- Offline
- Posts: 7
What happened is the Elev controls the rolling leftward and rightward, and Aile controls the forward and backward. And I want to correct it.
Please Log in or Create an account to join the conversation.
- John-Boy
- Offline
- Posts: 65
Google Translation of Documents
To download the manual in the language you need.
Please Log in or Create an account to join the conversation.
- droople
- Topic Author
- Offline
- Posts: 7
Please Log in or Create an account to join the conversation.
- Home
- Forum
- General
- General Discussions
- Devo 7e v4.0.1 and Hobsan X4 H107L Binding issue