Hey guys seeking help with my Devo 10

Hey everyone.

I've gone through the forums and have tried searching all over the net for help with my devo 10 it was used to fly my phantom but I got a T8J for my phantom and my flame wheel but the devo 10 is so nice to use with your custom firmware.

I have a Blade Nano QX and a Blade 350qx and I would love to run both of them (not at the same time of course) with my devo 10 i've tried other TX's ini's but there not working I appreciate your time and thank you in advance.

Syra.

I have working models for your Blade Nano QX and Devo 10. These work for the v3 and v4 firmware. Download the model to match the firmware version you are using.

deviationtx.com/forum/model-configs/2555...pter-and-quad-models

thanks Tom your a legend I used model6_2014-01-17.ini from your Blade Nano CP X it flys fine no agility mode I moved the FMOD switch to one and 2 and it took off was very funny till it hit the ceiling couldn't find the nano QX in the list

ohh i just got it into agility mode and i dont know how i did it. Cant switch it back now.

scratch that RUD0 DR on stick up and it switches.. bloody brilliant its really smooth Tom fantastic work can some of this be ported to the blade 350?

---

If I go up and down on the throttle to quick it switch's between Agility and Stability but even so its as far as I have gotten with it.

Thanks again tom.

Your welcome!
I saw your post for Blade Nano QX but got when I went to my list and saw Blade Nano CP X I thought that what you were looking for.
The Blade Nano QX is next on my list of models to make.

Did you try this model? It if for the v3 firmware.

deviationtx.com/forum/model-configs/1933...rizon?start=20#12197


I imported it to v4 and corrected the GUI layout and a couple of other things.
It should now work for v4 firmware if you want to try it. If it works OK I'll post it for people to use.

Syrabane wrote: ohh i just got it into agility mode and i dont know how i did it. Cant switch it back now.

scratch that RUD0 DR on stick up and it switches.. bloody brilliant its really smooth Tom fantastic work can some of this be ported to the blade 350?

---

If I go up and down on the throttle to quick it switch's between Agility and Stability but even so its as far as I have gotten with it.

Thanks again tom.

Is this for the Blade Nano CP X?
If so there is no Agility and Stability modes, just DR/EXPO to make it more tame or more responsive.

No its not the CP X its the Blade Nano QX

That is what I meant. You tried my Nano CP X model in your Nano QX?

yeah didn't see the QX in your list. Am I being dumb?

---

Ignore me tom i'm a complete idiot. Getting the right one now. DOH!

spot on Tom works even better now I put the right one on (feels like a complete idiot).

would the 350QX be kinda the same?

The Nano QX is not on my list. I made a mistake when I posted that I had a model for it. I was thinking of the Nano CP X not Nano QX.

See my post above this #18784. That should know work for your Nano QX.

Syrabane wrote: spot on Tom works even better now I put the right one on (feels like a complete idiot).

would the 350QX be kinda the same?

OK is this for the Nano QX model I posted for you in post #18784?

Q: would the 350QX be kinda the same?
A: Yes it should fly it but you will need to program all the GPS functions and other features for it.


Lots' of confusion here... Too many models and the names are similar.

Tom Z wrote: Your welcome!
I saw your post for Blade Nano QX but got when I went to my list and saw Blade Nano CP X I thought that what you were looking for.
The Blade Nano QX is next on my list of models to make.

Did you try this model? It if for the v3 firmware.

deviationtx.com/forum/model-configs/1933...rizon?start=20#12197


I imported it to v4 and corrected the GUI layout and a couple of other things.
It should now work for v4 firmware if you want to try it. If it works OK I'll post it for people to use.

100% working Tom perfect and with Firmware 4.0

the Blade 350 QX its big brother works on the same principle what's your thoughts on porting it to another model and seeing if it will work on its big brother

There is some stuff on the 350QX on the site but the INI's are not for my TX devo 10 and I agree far to many models I get confuzzled very quick

Great! Thanks for testing it and letting me know the results.
I posted the model so others can use it also.

Blade 350 QX, Walkera QR X350, and some others were on my list of models to make but due they are so complex and I don't own any of them to test fly I didn't want to make any of them.

I wouldn't port the Nano QX to the 350QX. The Nano QX model file doesn't have the programming for the GPS and other features on it. I don't know what would happen if you flew it without them.

No problem Tom going to look into it tomorrow and start from scratch see if I can do anything. No time like the present to learn how to do stuff