How to set a sound alarm for an actived switch

More
15 Apr 2014 17:49 - 15 Apr 2014 17:49 #22422 by lcn
Hello

I would like to get a sound alarm when a switch is set to ON.

Did not find how to do this.

Thanks for your help,
Last edit: 15 Apr 2014 17:49 by lcn.

Please Log in or Create an account to join the conversation.

More
15 Apr 2014 18:25 #22424 by FDR
No how, but what would be the purpose of that?

Please Log in or Create an account to join the conversation.

More
15 Apr 2014 18:56 - 16 Apr 2014 05:16 #22425 by lcn
It will be when the multirotor fail safe " back to home" switch is engaged .

Because this will radically change the multirotor direction so I would like the Devo warns this.

Is it possible to do it ?
Last edit: 16 Apr 2014 05:16 by lcn.

Please Log in or Create an account to join the conversation.

More
15 Apr 2014 20:31 - 15 Apr 2014 20:34 #22430 by esklarski
Replied by esklarski on topic How to set a sound alarm for an actived switch
I don't have an emulator or tx handy, but I feel this should be possible in a manner.

Make a virtual channel, max/min around the switch you want

Make a timer, 1sec countdown, on when switched on, reset with switch off position.

If you set the count up alarm to 1 sec intervals you'll get a beep every second once the switch is thrown. Set to 5, every 5 seconds. It will beep continuously though.

I'll try it out later today.
Last edit: 15 Apr 2014 20:34 by esklarski. Reason: spelling and clarity

Please Log in or Create an account to join the conversation.

More
15 Apr 2014 21:36 #22432 by esklarski
Replied by esklarski on topic How to set a sound alarm for an actived switch
Scratch that, easy to do. Assuming Mix2 as your return to home:

timer4 - countdown
switch - Mix2
reset - !Mix2
start - 00:00

in the tx config menu under timer settings set 'Timeup interval' to whatever (x) and you'll get a beep when the switch is flipped to Mix2 and beeps every 'x' seconds after.

Please Log in or Create an account to join the conversation.

More
16 Apr 2014 21:40 #22483 by lcn
Hello

Many thanks,

This solution works, but in the config menu i can't get 'Timeup interval' less than 5s.

It there a way to decrease it to 2s ?

Please Log in or Create an account to join the conversation.

More
17 Apr 2014 16:05 #22507 by esklarski
Replied by esklarski on topic How to set a sound alarm for an actived switch
What radio + deviation version are you using? My 6s lets me choose: off, and 1-60 in 1sec increments.

Please Log in or Create an account to join the conversation.

More
17 Apr 2014 20:23 #22524 by lcn
I've a Devo 12s

Please Log in or Create an account to join the conversation.

Time to create page: 0.057 seconds
Powered by Kunena Forum