what antenna nrf24l01

Hey guys,

I have ordered a devo 10 and this nrf24l01 module

www.banggood.com/2_4GHz-NRF24L01P-+-PA-+...le-V3_1-p-88956.html

The only thing I am wondering is what antenna I should order and what antenna extension cable I should order?

Thanks for your help,

Youri

youri wrote: Hey guys,

I have ordered a devo 10 and this nrf24l01 module

www.banggood.com/2_4GHz-NRF24L01P-+-PA-+...le-V3_1-p-88956.html

The only thing I am wondering is what antenna I should order and what antenna extension cable I should order?

Thanks for your help,

Youri

Take this cable ...

www.banggood.com/SMA-Male-To-Female-1_5m...-RG316-p-923073.html


After drilling a small hole into your devo to install the SMA connector, you will be able to screw any antenna with male SMA connector such as :

www.banggood.com/2_4G-3-Leaves-Omnidirec...smitter-p-76956.html


W type SMA connector for example

Thats what I thought aswell. the description says sma connector, but the picture looks like a rp-sma connector.

Or you can desolder the connector, get a piece of thin 50Ohm cable, solder it directly to the place where connector was, then bare the last 31mm of the cable (take off outer copper shell, leave alone inner insulation and wire) to get 2.4GHz antenna.

But good to know that circular polarizing antennas are available at Banggood.

victzh wrote: Or you can desolder the connector, get a piece of thin 50Ohm cable, solder it directly to the place where connector was, then bare the last 31mm of the cable (take off outer copper shell, leave alone inner insulation and wire) to get 2.4GHz antenna.

But good to know that circular polarizing antennas are available at Banggood.

Yes... Now I am using them. I find it's more efficient for treeriding. I also installed a 2.4G RX antenna on the quad too.

Jacky from BG will also stock the 2mm pins headers so all material required to build the MM can be find in the same place

this is the antenna i use on both my nrf24l01 and my a7105-500 modules and it works perfectly

hobbyking.com/hobbyking/store/__16666__F...r_antenna_15_cm.html

I want to get the Nrf module but I'm not sure how do you connect the antenna to it and does the antenna stick out of the TX or just tuck away on the inside ..I ordered a devo 10 but don't have it yet