frsky DHT-U in DEVO 8s?

Start
Prev
1
Next
End

Roland68
Topic Author
Offline

04 May 2014 22:18 #22891 by Roland68

frsky DHT-U in DEVO 8s? was created by Roland68

Hello,

it is possible the FrSky DHT-U module in the DEVO 8s be connected?
Maybe instead of the module CC2500?

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

04 May 2014 23:17 #22894 by PhracturedBlue

Replied by PhracturedBlue on topic frsky DHT-U in DEVO 8s?

It looks like it uses PPM-Out, so you just plug it in to the trainer port. I haven't actually tried it so you'd want to make sure that is actually the case.

Please Log in or Create an account to join the conversation.

Roland68
Topic Author
Offline

04 May 2014 23:45 #22895 by Roland68

Replied by Roland68 on topic frsky DHT-U in DEVO 8s?

I had not found a way telemetry equipment to use on a Devo Transmitter.
If this works so easy, it would be a simple and cheap way to use the FRSKY telemetry receivers and sensors with the Devo transmitters. Or are there problems?

The DHT-U module should with the ACCST receivers also have a very high range.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

05 May 2014 00:09 #22896 by PhracturedBlue

Replied by PhracturedBlue on topic frsky DHT-U in DEVO 8s?

I think the module itself displays telemetry? The description isn't very clear, but PPM-Out is a one-way signal that lets the Tx control the module. there would be no feedback. I'll likely get Telemetry working on the Frsky protocol (with the CC2500 module) before I release the next Deviation version though.

Please Log in or Create an account to join the conversation.

Roland68
Topic Author
Offline

05 May 2014 06:55 #22902 by Roland68

Replied by Roland68 on topic frsky DHT-U in DEVO 8s?

I have since found out that it works by PPM, and is already used in many current and old transmitters of all companies.
The DHT-U displays all telemetry data from all sensors, and can even save the data in the current version. Also, a voice output is possible with an additional module.
The DHT-U can attach up next to the antenna and then the telemetry data well in view without having to look so far away from the model down.

frsky DHT-U V2.3 Manual
frsky DHT-U V2.0 Manual

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.045 seconds

Re-enable mobile display