toggle switch recognition

More
17 May 2015 14:10 #32687 by Landin
toggle switch recognition was created by Landin
Is there any way to program deviation to recognize a switch toggle?
Like the taranis and other radios have?

Perfect when mixing and want to apply a switch to a sertain channel.

Please Log in or Create an account to join the conversation.

More
17 May 2015 17:29 #32698 by aMax
Replied by aMax on topic toggle switch recognition
Yes,
.....time for some reading.
www.deviationtx.com/user-manual

Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02

Please Log in or Create an account to join the conversation.

More
18 May 2015 06:16 #32722 by Landin
Replied by Landin on topic toggle switch recognition
Hmm. Didnt find anything about it, and still, if switching a switch while programming the radio, if toggle "gear-switch" nothing happens.

Please Log in or Create an account to join the conversation.

More
18 May 2015 12:43 #32730 by mwm
Replied by mwm on topic toggle switch recognition
Have you tried selecting either GEAR0 ro GEAR1 as either a source, or if you're not using a simple mix, either a source or switch in a mixer, as described in the manual?

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

More
18 May 2015 13:48 - 18 May 2015 13:54 #32733 by Landin
Replied by Landin on topic toggle switch recognition
what I mean by toggle switch recognition is to be able to flip a switch and transmitter then recognize which one I flip and automatically add it.. So if I want "Gear-switch", I just flip it and its added in to the mixer program. Like an Taranis radio.

As you can see here:
Last edit: 18 May 2015 13:54 by Landin.

Please Log in or Create an account to join the conversation.

More
18 May 2015 15:53 #32745 by FDR
Replied by FDR on topic toggle switch recognition
Nice feature, but deviation can't do that.
At least not yet... ;)

Please Log in or Create an account to join the conversation.

More
18 May 2015 16:07 #32746 by Landin
Replied by Landin on topic toggle switch recognition
Ok, thanx than I dont have to put more time in to finding how in the manual :lol:

Well, the Devo is recognize the inputs in the firmware so its not imposible to program, its all about software in this question, the hardware is all there =)

Looking forward to see it in the next update ;)

Please Log in or Create an account to join the conversation.

More
22 May 2015 02:38 - 22 May 2015 03:43 #32855 by hexfet
Replied by hexfet on topic toggle switch recognition
I'm working on adding this feature. The development discussion is here .

Last edit: 22 May 2015 03:43 by hexfet.

Please Log in or Create an account to join the conversation.

Time to create page: 0.069 seconds
Powered by Kunena Forum