Second antenna sideways

More
13 Jun 2015 12:16 #34001 by Arakon
Second antenna sideways was created by Arakon
I didn't have any chance to do a range check yet, so maybe someone here did.

I replaced my main antenna on my 7E with a standard screw-in antenna.
I also installed a CC2500 module for frsky. I soldered the old stock antenna to that and put it across the top of the transmitter, so that the actual (non-shielded) antenna piece is in the top right of the transmitter, oriented sideways. I taped it against the top of the transmitter case so it doesn't bounce around or get deformed.

Does anyone have any experience with that? Any problems/range issues?

Please Log in or Create an account to join the conversation.

More
13 Jun 2015 12:50 #34004 by Thomas.Heiss
Replied by Thomas.Heiss on topic Second antenna sideways
Hi,

I don't have.

But I would welcome a dual diversity antenna concept for the Devo 10 like the Spektrum DX9 / DX18 has :)

Greetings

Thomas

Please Log in or Create an account to join the conversation.

More
13 Jun 2015 14:41 - 13 Jun 2015 14:45 #34012 by aMax
Replied by aMax on topic Second antenna sideways

Arakon wrote: I didn't have any chance to do a range check yet, so maybe someone here did.

I replaced my main antenna on my 7E with a standard screw-in antenna.
I also installed a CC2500 module for frsky. I soldered the old stock antenna to that and put it across the top of the transmitter, so that the actual (non-shielded) antenna piece is in the top right of the transmitter, oriented sideways. I taped it against the top of the transmitter case so it doesn't bounce around or get deformed.

Does anyone have any experience with that? Any problems/range issues?

This is the way I have the fullsize dipol antenna of my NRF24 in the case. No issues, good range even at lower RF output.
www.rcgroups.com/forums/showthread.php?t=2183624&page=140

Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Last edit: 13 Jun 2015 14:45 by aMax. Reason: adding a link

Please Log in or Create an account to join the conversation.

Time to create page: 0.056 seconds
Powered by Kunena Forum