Devo 7e Clone?

More
24 May 2016 09:16 - 24 May 2016 09:22 #49113 by belowtheradar
Devo 7e Clone? was created by belowtheradar
Anyone noticed the display on this remote control?

Dynam Detrum GAVIN-6C

File Attachment:


This looks pretty familiar. Also the specs of this transmitter remind me of a Devo 7e running deviationtx.

What do you think?
Last edit: 24 May 2016 09:22 by belowtheradar.

Please Log in or Create an account to join the conversation.

More
24 May 2016 10:48 #49117 by Arakon
Replied by Arakon on topic Devo 7e Clone?
I was thinking the same when I saw it yesterday.. that screen looks very much like Deviation. I wonder if they just slapped together a basic STM-based board with a CYRF module.
If it didn't look like a toy transmitter (gray plastic, really?), I'd almost be tempted to get one to have a look inside.

Please Log in or Create an account to join the conversation.

More
24 May 2016 11:50 #49119 by kaligola
Replied by kaligola on topic Devo 7e Clone?
i went on the manufacturer site and saw forum too but is only a spam basket, they have some products on shop anyway. let's see what happens.

Please Log in or Create an account to join the conversation.

More
24 May 2016 11:51 #49120 by Fernandez
Replied by Fernandez on topic Devo 7e Clone?
It is a pity that the chinese manufacturars are not active on the forum.
Only Chiniese manufacturar who really listens and cooperates to open source, not only copies and clones, seems to be Frsky who developed Tarinis toghether with the community of open Tx and it became a great succes.

If these guys would have been in touch possibly we could have give them feedback and plans for the future deviation transmitter. As I see this Tx, just by the looks , I would stick to a devo,not my cup of tea..........

Deviation could also become massive if there would be a manufacturar bringing the "Future deviation Tx" on the market reasonably priced and design based on feedback from the forum and basically from its future customers.

Please Log in or Create an account to join the conversation.

More
24 May 2016 18:50 #49135 by victzh
Replied by victzh on topic Devo 7e Clone?
It looks more like a clone of Devo 10, not 7E. Interesting, what's inside.

Please Log in or Create an account to join the conversation.

More
24 May 2016 19:55 - 24 May 2016 19:56 #49137 by HappyHarry
Replied by HappyHarry on topic Devo 7e Clone?
Detrum = Deviation/Spektrum? modified devo firmware using dsmx as it's protocol perhaps?
Last edit: 24 May 2016 19:56 by HappyHarry.

Please Log in or Create an account to join the conversation.

More
24 May 2016 20:58 #49142 by belowtheradar
Replied by belowtheradar on topic Devo 7e Clone?
I have sent an email to the manufacturer. I'll keep you updated.

Please Log in or Create an account to join the conversation.

More
25 May 2016 04:10 #49171 by YJ
Replied by YJ on topic Devo 7e Clone?
This looks like a Spektrum (DX6i?) to me.

Please Log in or Create an account to join the conversation.

More
25 May 2016 05:51 #49180 by mwm
Replied by mwm on topic Devo 7e Clone?

belowtheradar wrote: I have sent an email to the manufacturer. I'll keep you updated.


I also think it looks more like a Spectrum TX than a 7e. Apparently, it's full sized. But all aircraft txs tend to fall onto a couple of design spaces, so it looking like a couple of different models is no surprise. Ditto for the screen display.

If it's really Deviation, they are obligated to make the source available, otherwise, distributing or is a copyright violation. But why would they limit it to 6 channels in this case?

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

More
25 May 2016 06:43 #49182 by dc59
Replied by dc59 on topic Devo 7e Clone?
I visit their TaoBao official site :
dynamrc.taobao.com/shop/view_shop.htm?sp...tracelog=wdpda_jrdp&

The sales told me it's DSM2/DSMX transmitter , I think it likes clone DX6i / STORMRC i6S / Orange T6 .......... but they changed UI.

Please Log in or Create an account to join the conversation.

Time to create page: 0.037 seconds
Powered by Kunena Forum