DEVO protocol and telemetry : what hardware ?

Another maybe a little dumb question :
As far as I understand it, the 5.0.0 version of deviationtx solves the "telemetry crashes the transmitter" issue that existed in 4.0.1.
My models have all Walkera Receivers (RX601, RX701, RX1002) with no telemetry build in.
there is the WK-CTL01-D telemetry module existing from Walkera, but as I just would like to be able to know my battery pack voltage in the model, this module seems a bit too overkill (and expensive).
So my question : is there some third party hardware existing allowing telemetry with the DEVO protocol ?

I think it could be interesting to test how a HK OrangeRX with integrated telemetry works (with DSMX protocol), but unfortunately for the moment all OrangeRX with telemetry are out of stock at HK...

Regards, Roland

Found these within 2 minutes of searching. Don't see where it specifies cppm or s.bus but if they're so rare better just BIN and deal with it when it gets to you...

www.hobbyking.com/hobbyking/store/uh_vie....asp?idProduct=90601


Edit: this link is for the cppm 6ch (9ch over cppm) so about the easiest to deal with FC input wise.

Cereal_Killer wrote: Found these within 2 minutes of searching. Don't see where it specifies cppm or s.bus but if they're so rare better just BIN and deal with it when it gets to you...
www.hobbyking.com/hobbyking/store/uh_vie....asp?idProduct=90601

Thanks Cereal Killer for your reply.
I saw this RX on Hobbyking, but I can't buy it because I live in Europe.

BUT...
Taking a look at Hobbyking page this morning, they have the 7 ch RX with telemetry in stock in the Europe Warehouse...
So I ordered 2 of them !
I anyway need 7 channels for my full house gliders.

Roland

IIUC (and I don't have to live with them, so may not), the European versions can't do DSM2. DSMX is fine. So I would expect the ones in the EU warehouse to not do DSM2, otherwise HK could find the authorities confiscating their stock (or whatever they do to people who violate those regulations).