Devo 10 w/4in1 module

Start
Prev
1
Next
End

Boomer45
Topic Author
Offline

04 Jan 2017 04:55 #57523 by Boomer45

Devo 10 w/4in1 module was created by Boomer45

I just installed BG 4in1 module and downloaded deviation s/w, now I get "missing modules multimod OK"
Any ideas as to what happened?

Thanks
Ron

Please Log in or Create an account to join the conversation.

ajtank
Offline

04 Jan 2017 05:53 #57526 by ajtank

Replied by ajtank on topic Devo 10 w/4in1 module

Did you remove the semi-colon on the last line: enable-multimod = A13?
Put the semi-colon back.

Please Log in or Create an account to join the conversation.

Boomer45
Topic Author
Offline

04 Jan 2017 17:51 #57534 by Boomer45

Replied by Boomer45 on topic Devo 10 w/4in1 module

Thanks ajtank, but no change. Other ideas?

Please Log in or Create an account to join the conversation.

Arnold
Offline

04 Jan 2017 20:41 - 04 Jan 2017 20:43 #57535 by Arnold

Replied by Arnold on topic Devo 10 w/4in1 module

Boomer45 wrote: Thanks ajtank, but no change. Other ideas?

Maybe you failed to save the hardware.ini file after putting the ";" back.
Or...
Maybe you didn't put the revised hardware.ini file with the ";" back in the Devo.

I doubt that you could have a version of Deviation that searches for the Multimodule on its own.

That's all I can think of.