Why I can't change the TX power of devo7e ?

Start
Prev
1
Next
End

Scccc
Topic Author
Offline

24 Sep 2017 02:58 - 24 Sep 2017 13:31 #64616 by Scccc

Why I can't change the TX power of devo7e ? was created by Scccc

I have been shorting resistance successfully. And I Changed the MCU to 256kb . But in the firmware(night building devo7e 256) of devo 7e 256 from night building can not change the power of transmitter it shows "default" . I need modify the "hardware ini "？What should do ?

Last edit: 24 Sep 2017 13:31 by Scccc. Reason: More clearly reason

Please Log in or Create an account to join the conversation.

mwm
Offline

24 Sep 2017 15:20 #64623 by mwm

Replied by mwm on topic Why I can't change the TX power of devo7e ?

I don't think the CYRF6936 in the 7E has a power amplifier in it, and that's the hardware that is used to change the power level. You can enable changing it in the software by setting has_pa-cy4f6936 to 1 in hardware.ini. But if there isn't one in the radio, changing the power levels in the settings won't do anything.

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.

Please Log in or Create an account to join the conversation.

Scccc
Topic Author
Offline

25 Sep 2017 14:50 #64659 by Scccc

Replied by Scccc on topic Why I can't change the TX power of devo7e ?

Thank for your help ,now I can change the transmit power from 100uw to 150mw. Thank you so much.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.038 seconds