Devention F7 transmitter stuck in Program Update

More
04 Jan 2018 15:27 - 11 Jan 2018 22:08 #66711 by wpincumbe
I have a devo F7 transmitter and was attemption to update. Now the device is stuck in "Update" mode. I have tried to turn on holding the "Ext" button as well as the "Ent" button. I cannot seem to get the unit out of this mode., I used the DFuse 2.31 version, and at first this seemed to allow me to get out of "Program Update", I have not turned the transmitter back on and again its in the "Program Update" Please help me is there a way to factory reset the unit,
Last edit: 11 Jan 2018 22:08 by wpincumbe.

Please Log in or Create an account to join the conversation.

More
05 Jan 2018 06:26 #66719 by vlad_vy
Replied by vlad_vy on topic Devention F7 transmitter stuck in update
What program and firmware do you use for update?

Please Log in or Create an account to join the conversation.

More
05 Jan 2018 16:07 #66726 by wpincumbe
Replied by wpincumbe on topic Devention F7 transmitter stuck in update
I used the Devo F7 Firmware 0.6A.dfu and the Dfuse-USB upgeade tools 3.0.5.zip

Please Log in or Create an account to join the conversation.

More
05 Jan 2018 16:40 #66728 by vlad_vy

Please Log in or Create an account to join the conversation.

More
23 Sep 2018 08:35 #71016 by des
Can you help me too.

I have devo F7 controller and is now stuck in Program update mode and nothing happens.

I have download the files that you have linked and tried upgrading the .bfu files but nothing happens. It says complete but I restart the controller and same thing.

Thanks

Please Log in or Create an account to join the conversation.

More
23 Sep 2018 10:30 - 23 Sep 2018 10:33 #71018 by Schugy
Replied by Schugy on topic Devention F7 transmitter stuck in update
Wrong
Last edit: 23 Sep 2018 10:33 by Schugy. Reason: wasn´t for original devention firmware

Please Log in or Create an account to join the conversation.

Time to create page: 0.059 seconds
Powered by Kunena Forum