iRangeX iRX-IR8M 2.4G 8CH Multi-Protocol

vlad_vy wrote: OK. Can you try next build with wider contrast range and report last contrast value before screen become black.

Attachment not found

It's completly black at 9 .... This one with the default 5 value offers more black than first tested release. I needed to set to 3 to retrieve same contrast as before

To run the remote control with the new receiver you need a specific software for the receiver. Not every version works. It is very important to set the value to 40-41 as in the photo.

Unable to Bind to a Bwhoop Pro using the Bayang Protocol.

I go to initialize with it and it just doesn't bind.

Tips anyone?

Transmitter powering up problem

If I turn off the transmitter I can’t turn it back on.

I tried unplugging the AA battery module and it often times still doesn’t power up.

At first I thought I had a bad batch of batteries but it still does it even with a fresh batch.

Sometimes waiting for more than few minutes does power it back up.

Does anyone else have this issue and possible fix?

Is Freq-Fine 40-41????

betoinbeta wrote: Transmitter powering up problem

If I turn off the transmitter I can’t turn it back on.

I tried unplugging the AA battery module and it often times still doesn’t power up.

At first I thought I had a bad batch of batteries but it still does it even with a fresh batch.

Sometimes waiting for more than few minutes does power it back up.

Does anyone else have this issue and possible fix?

Yes the same for me ....

My full video




with the flashing procedure... with the Vladvy build....

I've got my one today from banggood and i'm really disappointed, because of a missing button.

When i checked out all of the buttons i missed the click-sound when i pushed down the button S12 (trim backwards).

I've decided to open the radio and i was really really disappointed about what i found, see the attachment.

The second thing is, also attached, that the wheels on top have a totally different zero point. I can fix this, but the button is still missing afterwards.

I'm asking myself, how can someone forget to solder a button on the circuit board. To they not have a quality assurance what will push each button at least one time?

And, the wheels are not the one displayed on all product pages? They show chrome wheels of stainless steel or chromatted wheels what i got are wheels of white steel. So they attract me with a higher quality than i will get. All in all this this makes me feeling like i got ripped off. Thats not a good way to create long term customer relations. It's far away from that.

Did someone else have the same problem with the irangex irx-ir8m? a missing s12 button on the board?

Theta2 wrote: I've got my one today from banggood and i'm really disappointed, because of a missing button.

When i checked out all of the buttons i missed the click-sound when i pushed down the button S12 (trim backwards).

I've decided to open the radio and i was really really disappointed about what i found, see the attachment.

The second thing is, also attached, that the wheels on top have a totally different zero point. I can fix this, but the button is still missing afterwards.

I'm asking myself, how can someone forget to solder a button on the circuit board. To they not have a quality assurance what will push each button at least one time?

And, the wheels are not the one displayed on all product pages? They show chrome wheels of stainless steel or chromatted wheels what i got are wheels of white steel. So they attract me with a higher quality than i will get. All in all this this makes me feeling like i got ripped off. Thats not a good way to create long term customer relations. It's far away from that.

Did someone else have the same problem with the irangex irx-ir8m? a missing s12 button on the board?

back luck for the missing DIP ... In the worst can can take one from the throttle ?

For the POT. you can take the allen key to re-install correctly the button ?

The range is VERY VERY BAD with me!

Fuck!

Did you select 100mW ?

Or tune the center freq in prot options. It is known that especially AFHDS2a there are many cheap receivers out there with X-Tal off center reducing range a lot. (or not bind at all)

SeByDocKy wrote: Did you select 100mW ?

No, I also fly to 150 mw, like my friend. He also has this remote condition I have the R-xsr receiver in it .. He has the Flysky i6b.

He has no ranges problems .. I do.

I did that too!