Frsky R9 module

Is it possible to add the Frsky R9 module to Devo transmitters by using the pinout and plugging it to the dsc port on the back of the transmitter? Looking for long range options and thought the R9 might be a good choice...
Thanks all..
<Marty>

Frsky uses PXX serial protocol I beleive.

Hexfet did a good job adding some serial protocols as CRSF and SBUS. topic here: www.deviationtx.com/forum/protocol-devel...al-out-for-lrs-boxes

But Personally I hope some one to hookup logic analyser to it's R900m or Crossfire and deviation to be able to talk to a Semtech module.

According to this page the R9M JR module accepts both PXX and PPM. Should be able to use it with PPM in deviation. Have not looked at what it would take to add PXX to deviation.

That's good news..So all i should need is the pin out on the module and make up a cord to plug into the DSC port...Then supply the correct voltage to the module ect...