Some question about T8SG V2.0 Plus

If I use DeviationUpload-0.9.0.jar I need to install drivers ?

When start with ESC on power, T8SG+ entry in mod DFU programming ?

When start with ENT on power, T8SG+ entry in mod USB, like an external memory ?

On two computer with Windows 7, I have tried without succes, all that I read on this forum.

On my computer with Ubuntu 16.04 LTS, I have tried too, without succes.

I'm confused now. No connection with PC. What am I doing wrong?

Thank you, for any help or suggestion.

Thank you Vlad_vy for answer.

Ok on windows 7, I have tried to install this driver, with and without F8 (disable signature for drivers). I do not see my T8SG+.

On XP, I have tried version 1.0, but receive a message that program can not be executed. No success.

On Linux (Ubuntu 16.04 LTS), I have some experience with arduino, trinket, etc. No connection with T8SG+.

I have tried too USB connection from menu.



Nothing to see on computers (Windows or Linux).

I have stock firmware. This feature work with stock firmware or not ?

All, that I see under Windows 7 Pro, when connected T8SG_V2+ is unknown device. But useless, because I do not see in DevoDfuSe utility, when start with EXT on power, and same result, useless when power with ENT. I try to force to install a driver from STM for STM Device in DFU Mode, but have received Cod 10 error.

I have follow all steps from manual. I have tried many cable USB. Maybe defective on this part USB connection my T8SG V2 Plus.

Other way station work fine, but I want to save my model, and think that will be in time, request for a firmeware upgrade.

Any ideea ?

When mine says usb off I can see it on my windows 10 machine.