Differential thrust

I'm trying to mix differential thrust in the Jumper t8sg plus but not having much luck. Has any body done this?

I have two 10 amp escs and B1806 motors Iv been thinking of using in a wing with differential thrust.

You would have to go into mixers and use rudder for source (unless you were using ailerons). Hum then two channels for port and starboard throttle.
Ill have to get back, but its a really good question.

I have a few planes with diff thrust but I use a spectrum dx6 with them,simple only 2 mixes. One esc in throttle second in aux channel. Even to get duel rates with deviation is a long process. Kind of gave up let me know if you come up with a way. Thank you.

See this thread . Need one channel for each motor. One way to do it is complex mix with two pages, first page has THR as source, second page is Add mix with rudder source scaled appropriately. Second channel is the same but with rudder inverted.

My Model ini
Twin edf A10 warthog

Cool hey so now is when we can take the file from jejeg model26.ini and dump it into ones transmitter usb drive fold "models".
Then load new model on transmitter and pull that model up, it will be there?
This is fantastic we can see how you did it thanks, how cool that saves so much time.

Motor 1 : channel 3 (with devo receiver)
Motor 2 : channel 7
Do not connect on channel 4
Fmod0 : no mixing
Fmod1 : mixing on

Good flight
Jérôme