- Posts: 21
Jumper T8SG V2 Plus strange problem
- Suter
- Topic Author
- Offline
Less
More
05 Dec 2018 05:59 #71987
by Suter
Jumper T8SG V2 Plus strange problem was created by Suter
I have had very strange occurrence which so far I have not been able to resolve.
It just happened, the following are the symptoms that I have noticed so far.
On Main Page
Trim RV:- Works correctly when pulling down
Trim RV:- on short up activates a timer. Left enter arrow stops timer
Right enter arrow starts time. Timer has been set off Throttle stick as countdown
No timers reset switches have been allocated
Trim RV:- on long up activates GPS
Trim RH:- On short to the left is normal
Trim RH:- On long to left activates both LH Aileron Trim and Up throttle trim together
Trim RH :- to the right cycles thru the Main Menu
Trim LV:- will travel both up and down on short press and long press
Trim LH:- seems normal
To try to fix this I have flashed the Nightly Build that I have been using, and transferred all the models back and the problem remains
I hope someone has an idea about this one it does seem strange.
Cheers
Will Suter
It just happened, the following are the symptoms that I have noticed so far.
On Main Page
Trim RV:- Works correctly when pulling down
Trim RV:- on short up activates a timer. Left enter arrow stops timer
Right enter arrow starts time. Timer has been set off Throttle stick as countdown
No timers reset switches have been allocated
Trim RV:- on long up activates GPS
Trim RH:- On short to the left is normal
Trim RH:- On long to left activates both LH Aileron Trim and Up throttle trim together
Trim RH :- to the right cycles thru the Main Menu
Trim LV:- will travel both up and down on short press and long press
Trim LH:- seems normal
To try to fix this I have flashed the Nightly Build that I have been using, and transferred all the models back and the problem remains
I hope someone has an idea about this one it does seem strange.
Cheers
Will Suter
Please Log in or Create an account to join the conversation.
- Suter
- Topic Author
- Offline
Less
More
- Posts: 21
10 Dec 2018 21:45 #72043
by Suter
Replied by Suter on topic Jumper T8SG V2 Plus strange problem
I realize that my post is very long winded and probably difficult to understand.
It is hard to describe the symptoms with words
It would probably be easier to analyze with a video.
Attached is a video which hopefully shows my problem.
To me it appears to be a Transmitter Hardware failure.
It is hard to describe the symptoms with words
It would probably be easier to analyze with a video.
Attached is a video which hopefully shows my problem.
To me it appears to be a Transmitter Hardware failure.
Please Log in or Create an account to join the conversation.
- hexfet
- Offline
Less
More
- Posts: 1891
10 Dec 2018 23:30 #72045
by hexfet
Replied by hexfet on topic Jumper T8SG V2 Plus strange problem
Yes, it seems consistent with a problem with one or more of the
button matrix
connections. Check the processor pins for shorts or poor solder joints.
Please Log in or Create an account to join the conversation.
Time to create page: 0.035 seconds
- Home
- Forum
- General
- General Discussions
- Jumper T8SG V2 Plus strange problem