Steps I followed:
1. Set my TX in boot mode by turning it on and pressing the back button at the same time, TX is recognized on deviation uploader
2. Installed the latest nightly build using the deviation uploader
3. Turn the TX off and on again, screen turns black, will not boot and Windows forces me to format the drive
4. I format the drive and this time instead of using deviation uploader I just unzip the firmware files and copy them using windows explorer to the formated drive, when I turn on I get blackbars on the screen it won't boot
5. I install DFU via deviaton uploader and try to boot, I get a two tone beep on on boot, the screen has black bars this time with the backlight on,
6. I can't access the drive via Windows Explorer anymore, even by pressing the enter button and turning the TX on
7. At this point I can only install a new firmware using deviation uploader, si I do that and I get black bars again
Could you guys help me out?, not sure what an I doing wrong and it's being several lost days already
