Binding devo 10& WLtoys v977

Hi guys, I bought new 977, and I have devo 10. I don"t know how it can be binded.

Help me please.

The v977 uses the KN protocol so you'll need an NRF24 device in your devo10. This post has a v977 model file for t8sg that you can adapt - just change the switches. There's some other posts about v977 - use the search button above to find them if you have trouble.

You didn't understand me. I need an instruction of process.

Maybe this post will help. Generally it's just power on the heli and press the Bind button in Model Setup. I probably still don't understand what you're asking and don't have this heli. Search the threads here or rcgroups.

The multimodule was already installed several years ago.
By mistake I have formated the device, and wanted to recover it.
It's my dads devo, I can't bind 977 with transmitter.
Somebody know how I should do it?

Have you checked or made the necessary entries in the hardware.ini for the multiprotocol module after restoring the Devo 10?

No, I'm not can you share with me an example or ready .ini file?

Use this link and scroll down to the section für Devo 10 there you find the entries for the hardware.ini. Make a backup before editing.

www.deviationtx.com/forum/7-development/...dule?start=940#55157

I edited a file. What's next?