Devo 12S nightly

SamtheMan
Topic Author
Offline

13 Feb 2013 08:24 #6342 by SamtheMan

Devo 12S nightly was created by SamtheMan

Is this far enough along where I can buy a Devo 12s now? (I told my wife I wouldn't buy a Devo 12s until this firmware was mostly functional).

Sam

Please Log in or Create an account to join the conversation.

Hexperience
Offline

13 Feb 2013 11:09 #6349 by Hexperience

Replied by Hexperience on topic Devo 12S nightly

Working well for me.

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

17 Feb 2013 14:55 - 17 Feb 2013 15:16 #6480 by Hexperience

Replied by Hexperience on topic Devo 12S nightly

5f1e3695ea6e gave me a couple of problems.

When pressing the button to go into TX config, momentarily a battery warning page would flash on screen and disappear. My battery is above the alarm setting.

Also, it seems like it stopped being able to write to the tx.ini file. When I select a different model, then turn off the devo, then back on, it would go back to the model I previously had selected.

I went back to an older version for the moment, and will try flashing it again to make sure these issues are repeatable.

---

Re-flashed re-installed FS the battery alarm is not allowing the tx.ini file to be written.

There are 10 types of people in this world. Those that understand binary and those that don't.

Last edit: 17 Feb 2013 15:16 by Hexperience.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

17 Feb 2013 16:04 #6482 by PhracturedBlue

Replied by PhracturedBlue on topic Devo 12S nightly

what is the battery alarm set at? what value do you see on the screen?

Please Log in or Create an account to join the conversation.

Hexperience
Offline

17 Feb 2013 23:50 - 17 Feb 2013 23:52 #6493 by Hexperience

Replied by Hexperience on topic Devo 12S nightly

With the older version it shows about 4.1v when I install newer version it shows about 3.8 or so. The alarm seems to be set at 4v by default? I have been installing the FS completely including the tx.ini.

I'm going give it a good charge and make sure it's 4.2 when I install again. I'll also try leaving the tx.ini and see what happens.

There are 10 types of people in this world. Those that understand binary and those that don't.

Last edit: 17 Feb 2013 23:52 by Hexperience.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

18 Feb 2013 00:33 #6494 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

So is deviation working with the devo 12s? fully functional? it doesn't say its supported and that is the only thing holding me from getting a 12s, please let me know.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

18 Feb 2013 00:56 #6495 by Hexperience

Replied by Hexperience on topic Devo 12S nightly

Well as you can see it is still in testing but overall its looking very good.

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

18 Feb 2013 01:07 #6496 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

ok great im going to go ahead and purchase a devo 12s

Thank you guys.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

18 Feb 2013 01:25 #6497 by PhracturedBlue

Replied by PhracturedBlue on topic Devo 12S nightly

The default alarm is at 4V
The critical value was at 3.8V
On the devo12, it reliably reads down below 3.4V (as opposed to other Tx where it is unreliable below 4V) so I dropped the critical value to 3.5V.
I also recalibrated the tx so it should be accurate again after the updated scanning changes.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

18 Feb 2013 01:44 - 18 Feb 2013 01:45 #6498 by Hexperience

Replied by Hexperience on topic Devo 12S nightly

Yes, running a tx on 1 cell was an odd choice. Makes it difficult to even add a module. Thanks fir the fixes PB.

There are 10 types of people in this world. Those that understand binary and those that don't.

Last edit: 18 Feb 2013 01:45 by Hexperience.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

18 Feb 2013 03:12 #6501 by Hexperience

Replied by Hexperience on topic Devo 12S nightly

Firmware loads up fine now. Thank PB.

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

18 Feb 2013 07:33 #6504 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

so i finally ordered my Devo 12s, thank you PhracturedBlue for all your hard work, i will provide as much feedback as possible

this is such a great tool.

Please Log in or Create an account to join the conversation.

Seabee92155
Offline

22 Feb 2013 03:07 #6751 by Seabee92155

Replied by Seabee92155 on topic Devo 12S nightly

Man this is great! SamtheMan, I have just ordered my Devo 12s too. I am new to this site and have no idea on how to do the next step of installing the firmware. A minor detail I hope, These guys are great, I can't believe I am going to be able to have one transmitter flying multiple models with different receivers....yahoooooo! Good luck and hope it all works out.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

27 Feb 2013 07:13 #7126 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

does anybody know if the full screen emulator for the Devo 12 would work with the 12s? i was reading of some people tweaking the screen of the 12.

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

27 Feb 2013 08:27 #7127 by rbe2012

Replied by rbe2012 on topic Devo 12S nightly

Yes, Hexperience and I have done some work on it, but it is still experimental.
It works, but we are not that far to bring it in into the next release.
You can stay tuned here: Emulator for Devo12

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

02 Mar 2013 15:42 #7216 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

i finally received my devo 12s, the throttle stick came broken

but i fixed it now it works great, now when i cant get it to go into DFU mode, I have it connected to my computer and its charging but when i press the EXT button and then turn it on it boots up normally, it does the same with the ENT button, im at a loss any suggestions?

Thank you

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

02 Mar 2013 15:47 - 02 Mar 2013 15:48 #7217 by vlad_vy

Replied by vlad_vy on topic Devo 12S nightly

If you take a look in DfuSe manual - Hold the DEVO-12’s TRN switch and keep it up,...

Last edit: 02 Mar 2013 15:48 by vlad_vy.

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

02 Mar 2013 16:03 #7219 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

Thank you, that worked

Please Log in or Create an account to join the conversation.

Lasercopter
Offline

02 Mar 2013 16:24 #7220 by Lasercopter

Replied by Lasercopter on topic Devo 12S nightly

now one last question, how do i get it into USB mode, not programing mode.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

02 Mar 2013 17:39 #7221 by vlad_vy

Replied by vlad_vy on topic Devo 12S nightly

Press 'ENT' and switch on Tx.

Please Log in or Create an account to join the conversation.

Time to create page: 0.073 seconds

Force desktop display