Devo 12s PPM

Start
Prev
1
Next
End

Lasercopter
Topic Author
Offline

17 Nov 2013 23:47 #15661 by Lasercopter

Devo 12s PPM was created by Lasercopter

Im trying to get my EZUHF that i have connected to the trainer port that has PPM output, i only seem to get 8 channels to work, does the devo 12s output more that 8 channels via the trainer port?

Please Log in or Create an account to join the conversation.

FDR
Offline

18 Nov 2013 05:19 #15667 by FDR

Replied by FDR on topic Devo 12s PPM

It is all about timing.
AFAIK this is what possible with standard pulse widths in a standard frame size...

Have you tried to change the PPM properties, for example increase the frame size to see if there could be more channels fit in. You can try to decrease the notch pw a bit too...

Please Log in or Create an account to join the conversation.

Lasercopter
Topic Author
Offline

18 Nov 2013 05:26 #15668 by Lasercopter

Replied by Lasercopter on topic Devo 12s PPM

Is it possible to change the ppm properties using the stock software? do you decrease accuracy by adding more bits in the same stock space?

Please Log in or Create an account to join the conversation.

FDR
Offline

18 Nov 2013 05:28 #15669 by FDR

Replied by FDR on topic Devo 12s PPM

Oh no, with the stock fw yo can't change the PPM properties.
We are talking about deviation on this site...

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

18 Nov 2013 06:37 #15671 by rbe2012

Replied by rbe2012 on topic Devo 12s PPM

AFAIK supports PPM only 10 channels (due to timing restrictions).

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.035 seconds

Re-enable mobile display