New "nightly build"

bce9b99 This is in the test builds folder. The github nightly build is broken and I don't have access to fix it.

• PR1043 by bnmoore fixed an issue with number parameters in CRSF configuration
  
• PR1040 by phantom-8 fixed bug with audio when shutting down
• PR1044 added CRSF V3 speed negotiation and support for 2.0Mbps data rate with TBS XF Transmitter. If the model data rate is set to 400K the rate will be negotiated up to 2.0Mbps. But just select 2.0Mbps as the model data rate with TBS and the XF module will auto-baud immediately.
• PR1045 added support for Flysky AC type telemetry ("extended" telemetry) sensors. Tested by Pavel with altitude and temperature sensors. Added "max altitude" telemetry value to FrSky telemetry. On Telemetry test page the value is in the last row right-most column. Available in telemetry config as "MaxAlt". Reset to 0 by long press of UP on Telemetry test page.
• PR1046 CRSF configuration menu improvements
** When a parameter is changed, all elements of the current folder and the folder itself are reloaded. This handles dynamic changes to parameter names and options caused by changes to other parameters. For example, with ELRS changing the packet rate can cause the available switch mode options to change. This can be a little slow at 400Kbps data rate so be sure to use 1.87Mbps(ELRS) or 2.00Mbps(TBS).
** Parameters where the label + value lengths are wider than the screen are split into two rows. This fixes an issue with values partially overwriting label strings in the display.
** When navigating between folders the current selection in a folder is remembered. If the folder is opened again the same row will be selected.

Wow, wow, thank you very much for your efforts. I thought this project would become history:P

You're welcome. From your tx list looks like I need to add the latest stuff to the color screens too

I like my devo10 and t8sg, and I'm using ELRS so will keep up with CRSF.

Thank you hexfet for single-handedly carrying on the deviation legacy !!

0864258

PR1047
- hidden flag was not set correctly
- TBS param echo caused page update problem
- Fix overlap by a few pixels
- Add Show Hidden protocol option to display CRSF config parameters even when they're marked hidden.

The only place I know hidden parameters are used is in the TBS Radio Settings folder. Setting the Region to anything but Open changes the Region and Frequency parameters to hidden. The Multi-Bind option is hidden unless the tx is registered with TBS.
The Show Hidden option can be used to change the Region even if was previously changed to something other than Open. Changing the Multi-Bind option has no effect - the display will change back to Disabled after the change is sent to the tx. It can only be Enabled if the tx is registered. Changes to the Frequency when the Region is not Open appear to be accepted by the tx but did not test if the changes have any effect.

PR1048
- Add max altitude to Frsky telemetry to color screens, placed just right of regular altitude value.
- Bring color screen up-to-date with CRSF changes
- Remove support for LOLI protocol to free space for 256K processor builds