- Posts: 1016
XK K110 (S-FHSS) build for Devo 7E and Devo 10
- SeByDocKy
- Offline
Please Log in or Create an account to join the conversation.
- victzh
- Topic Author
- Offline
- Posts: 1386
Please Log in or Create an account to join the conversation.
- FlipRide1
- Offline
- Posts: 6
Please Log in or Create an account to join the conversation.
- Fernandez
- Offline
- Posts: 983
I assume many more models will use it, than XK K110
Please Log in or Create an account to join the conversation.
- victzh
- Topic Author
- Offline
- Posts: 1386
Please Log in or Create an account to join the conversation.
- Babay
- Offline
Please Log in or Create an account to join the conversation.
- victzh
- Topic Author
- Offline
- Posts: 1386
Please Log in or Create an account to join the conversation.
- Babay
- Offline
No, not original. But marked "FTR" - Futaba Transmitter Ready. Here is a link to this quadcopter. First page of user manual contains this string: "This model is compatible with FUTABA FHSS 2.4GHz Transmitter".victzh wrote: What kind of receiver it uses? Futaba's original?
Please Log in or Create an account to join the conversation.
- Leon
- Offline
- Posts: 4
I USE FUTABA R2008SB AND DEVO10,SFHSS IS WORKING ON THE R2008SB
GOOD JOB!!
Please Log in or Create an account to join the conversation.
- dc59
- Offline
- Posts: 799
Leon wrote: HI Victzh
I USE FUTABA R2008SB AND DEVO10,SFHSS IS WORK ON THE R2008SB
GOOD JOB!!
I was a really good news,Thanks Leon.
Please Log in or Create an account to join the conversation.
- victzh
- Topic Author
- Offline
- Posts: 1386
Please Log in or Create an account to join the conversation.
- Slammer
- Offline
- Posts: 23
just wanted to give you a heads up on the XK X350 power board and receiver board. I recently lost signal to my x 350 with the stock tx and it crashed upside down onto the only piece of concrete around cracking the power board...
Ordered all new PB, RB and 4 new ESC's to do a rebuild...this is the part i wanted you guys to hear....the new power board and receiver board are REV. 4 now. The receiver board looks a little different from the REV. 3....if you would like i could post a few close up pics later, just let me know..
I was also waiting for the S-FHSS build for 12S, do you think the change from Rev.3 to Rev. 4 will effect anything with the build?
Please Log in or Create an account to join the conversation.
- victzh
- Topic Author
- Offline
- Posts: 1386
I believe that last nightly builds should already have it. Check out the last one: www.deviationtx.com/downloads-new/catego...s-nightly-2016-03-19
Please Log in or Create an account to join the conversation.
- Slammer
- Offline
- Posts: 23
I have to say i was very excited to see SeByDocky fly the XK X350 with Deviation....
Please Log in or Create an account to join the conversation.
- victzh
- Topic Author
- Offline
- Posts: 1386
1. switch your Deviated Devo to USB mode - easiest is to turn in on holding ENT key,
2. Open the Devo's drive on your computer and look for 'models' folder. You'll see many modelXX.ini files which represent individual models.
3. Copy over SeBy's file into one of them
4. Turn off Devo and turn it back on
5. Find your model among your models and select it.
6. Enjoy!
Please Log in or Create an account to join the conversation.
- Slammer
- Offline
- Posts: 23
Please Log in or Create an account to join the conversation.
- Fernando
- Offline
- Posts: 68
victzh wrote: I hope by the time you get your module it would be propagated to the main build.
Hi victzh!, the CC2500 module arrives before than expected from Banggood. I already got it and maybe today or tomorrow will make the mod to my transmitter Devo 8s. Is the protocol already included in the latest nightly on this wesite? Can you (or someone) provide me a Devo8S XK-K120 model?
Thank you
Please Log in or Create an account to join the conversation.
- dc59
- Offline
- Posts: 799
Fernando wrote:
victzh wrote: I hope by the time you get your module it would be propagated to the main build.
Hi victzh!, the CC2500 module arrives before than expected from Banggood. I already got it and maybe today or tomorrow will make the mod to my transmitter Devo 8s. Is the protocol already included in the latest nightly on this wesite? Can you (or someone) provide me a Devo8S XK-K120 model?
Thank you
You can find my DEVO10 config file for K120 as below,it should be used on 8S.
www.deviationtx.com/forum/builds/5569-xk...vo-10?start=20#44758
Please Log in or Create an account to join the conversation.
- Fernando
- Offline
- Posts: 68
But I still do not know if the latest nightly for 8S includes already the F-SHSS protocol support. I hope so....
Please Log in or Create an account to join the conversation.
- Fernandez
- Offline
- Posts: 983
www.banggood.com/CORONA-CR4SF-S-FHSS-2_4...itter-p-1006324.html
Please Log in or Create an account to join the conversation.
- Home
- Forum
- Development
- Builds
- XK K110 (S-FHSS) build for Devo 7E and Devo 10