- Posts: 3333
Ultimate Devo F12E (devof12e-XMS) builds
- vlad_vy
- Topic Author
- Offline
Please Log in or Create an account to join the conversation.
- Artus
- Offline
- Posts: 105
(I have the walkera 350 premium and i will bring this little bird step by step to Deviation)
DEVO10 4in1 V5.0 DEVO F12E 4in1 V5
Align TREX 100 (3) Hubsan Q4
Walkera QRW100S Walkera QRX 350 Pro (FPV)
Walkera QRX 350 PREMIUM
DIY 100 mm Micro QUAD - HGLRCF4F5PRO with INAV
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
vlad_vy wrote: It looks like empty placeholder (window) for model icon and graphs partially overlay Splash dialog and Safety dialog.
*Fixed XY-graph placeholder overlay "Splash" page for Devo F12E
At boot time empty XY-graph placeholder overlay "Splash" and "Safety Warning" pages and cut off portion of image.
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Files deleted, see below...
Please Log in or Create an account to join the conversation.
- M8A4X
- Offline
- M8A4X
- Posts: 103
Finally the 4MB flash chip arrived, a quick comparison with the soldered in flash chip showed the difference in chip size you mentioned.
Well, steady hands for the win
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Other known bug: model "Icon" load/change page doesn't display icon image.
Please Log in or Create an account to join the conversation.
- Moeder
- Offline
- Posts: 796
Since I have no write access to the repo, I cannot merge the pull request.
Please Log in or Create an account to join the conversation.
- FDR
- Offline
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Files deleted, see below...
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Known bugs:
* Model "Icon" load/change page doesn't display icon image.
* At "Throttle curves" and "Pitch curves" pages, value fields for inactive YX-graph points have not any visible highlight or cursor.
P.S. Advanced mixers have XY-graphs
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- vlad_vy
- Topic Author
- Offline
- Posts: 3333
Files deleted, see below...
Please Log in or Create an account to join the conversation.
- M8A4X
- Offline
- M8A4X
- Posts: 103
I followed your advice to bend the chip pins pretty straight, put fresh solder at the pads and the chip pins, pretty easy soldering it in. I Just "securded" it with a bit of hot glue.
After installing deviation the "unusual way" for a F12E with formatting the tx drive in windows and putting the files on deviation booted fine Also copying my models over went well, 4in1 modules is working!
I will test now a few "bugs" that occured to me on former nightlies.
Thank you for your work, vlad!!
Please Log in or Create an account to join the conversation.
- Home
- Forum
- Development
- Builds
- Ultimate Devo F12E (devof12e-XMS) builds