Devo F7 - Backlight and P/B Light Dimmer Funktion

Hello,

on My Devo F7 and Devo F7DS i use the FW -> Devof7-v5.0.0-be57e84
For me the Dimming is not Working well.

On my Devo10 the Dimming is working very well, after the Adjusted Time the Diplay goes to dark,
but on the F7 there is nearly no differnce between Dimming and Normal. In Dimming Mod is mostly more bright as in normal mod.
The Pushbutton is shining all the Time.

Transmitter Menu
1. Transmitter Config
-> Backlight: 1 bright - 9 slightly darker -> 10 is off
-> Dimmer time: steps in 5 seconds is Okay
-> Dimmer target: off -> 1-10 not Working, it´s make more brightly shine LCD backlight.

In Summery:
Backlight steps must be more efficent to reduce more light (bright to dark, Scale 1-10 must be Adjusted)
Dimmer Target shoud reduce the brightness to the new Adjusted scale 1-10
The Blue Shining Ring (around the Pushbutton) must be switched off in accordance to the Dimmer Time Value.

Hopefully somebody can fix it and provide me a working dfu.

THX
Sven

Hi, I have fixed this issue: github.com/xuyuan/deviation/commit/07d5b...f5d5f6ed99bf65f79a79
If you have 4M memory installed, I can provide mine binary.

Thanks for the reply...

4M ? means the memory?

I have the Standard Out the Box and only Put Deviation on it. (and Puted an external Port for the 5.8ghz Antenna)

For me i need the FW with this Fix included.

Thanks
Sven

Thanks for the build an the Fix.

No it´s Working on a good track
The Backlightvalue and the Dimmer Function Working Fine

Another Request:

1)
Is it possible to add Dimmer target "0"
(means iff you putt Backlight to "0" the Display Light is complitly Off, add this Value also for Dimmer target, for some Modells do not need Display during the RC Controll, Sticks are not effecting the Dimmer Function)

2)
The blue Shining Rings aroud the PB are allways shining, could this also be turned Off in Dimming Mode ???

.... programming is not my World.

many thx to all for the very Good Support

BR
Sven

Test Performed, Working very Well.
Now you see Big diferences During Dimming !!!
Perfekt... Big Thanks !!!!

With the 12.12.2017 Build:
On my Devo F7DS -> Dim Off = LCD Off
-> Dim 1 = lightly shining

On my Devo F7 -> Dim Off = Display is on, eaqual to Dim1 of my F7DS

Maybe Therefore musst be more Hardware diferences not only the Videosystem....


The P/B LED seams to be hardwired to the Power BUS.
I will Check next time when i'll Open it.

BR
Sven