Config for Mini/Genius CP for Devo6s

Start
Prev
1
Next
End

Sonnno
Topic Author
Offline

29 Nov 2012 14:53 #3416 by Sonnno

Config for Mini/Genius CP for Devo6s was created by Sonnno

Hi all,

I just buyed the devo6s, because i´m fastinated by the deviation project. Unfortunately the Firmware overwhelmed me. So I search a good config for the Genius CP (WK Receiver) and for the Mini CP (Devo), or can i installed the Configs for the Devo8s?

Thank you by answering my questions!

Please Log in or Create an account to join the conversation.

FDR
Offline

29 Nov 2012 15:02 #3418 by FDR

Replied by FDR on topic Config for Mini/Genius CP for Devo6s

You can use the DEVO 8 configs, just check what switches it uses, because you have less switches available.
The fw converts the unavailable switches to the exising ones, but it may result that the same switch is used for two (possibly contradictional) functions...

Please Log in or Create an account to join the conversation.

Sonnno
Topic Author
Offline

29 Nov 2012 15:11 #3419 by Sonnno

Replied by Sonnno on topic Config for Mini/Genius CP for Devo6s

Thank you. Then i will download the config for Devo8s

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.026 seconds