Walkera 4G3

Need a working .ini file for Walkera 4G3.
Tried myself, but pitch did not work.

Hi!
I did a basic setting for the 4G6, it should work with the 4G3, please test it.

Thanks for you .ini file.
I testet it, but same problem as my own file. Pitch did not work.
May be a general problem with WK2601 mode or RX2605?

ciao, Bernd

Did you try the different modes for WK2601 (click on it, you get to channel mode). I do remember a little bit that I had a similar issue with RX2604 but I have thrown the config away...

Hi,
Probably the Col Limit is set to 0 in the Channel mode of your WK2601 protocol...

I have the RX2609 in the 4G6...
Try to use the 2801 mode with 6 ch.

2801 mode did not bind.
I have a RX2605 and not a RX2605A

If I remember correctly RX2605 was known for having trouble even with the 2801.

But don't take my word for granted, it was a long time ago.

Walkera mojo as always

I'll try to confirm by digging the old 4g3 thread on Rcgroups, but it will take some time.

Edit:

Found something but don't know if related.

See post #520 and following posts until #528

www.rcgroups.com/forums/showthread.php?t=984787&page=35

You can find here a setup for a 4g3 (2605 RX) in 2601 mode on the 2801 (#2 post)

rcfriends.createforumhosting.com/2801-combo-settings-t228.html

I know there is more information scattered on the 4g3 and "new" 4g3 threads on RCG, you'll have to search them... time to go to bed