- Posts: 16
Super CP
- coreire
- Topic Author
- Offline
I tried to keep it close to the standard setup in the heli's manual.
Throttle hold is controlled by RUDD D/R, cuts throttle but does not affect pitch.
There are 3 gyro settings, which are controlled by the Mix switch.
Mix0 - 75%
Mix1 - 50%
Mix2 - 40%
There are 3 flight modes, controlled by the FMOD switch.
FMOD 0 = Standard flight
70% rates on aileron and elevator channels
-20 to +50 pitch curve
FMOD 1 = Stunt mode 1
70% rates on aileron and elevator channels
-50 to +50 pitch curve
V throttle curve - 100%, 75%, 100%
FMOD 2 = Stunt mode 2
100% rates on aileron and elevator channels
-50 to +50 pitch curve
V throttle curve - 100%, 75%, 100%
AILE D/R will give 100% throttle output, regardless of the position of FMOD.
Please Log in or Create an account to join the conversation.
- sbstnp
- Offline
- Posts: 649
Devo 10 + 4in1
FrSky Taranis + TBS Crossfire
Please Log in or Create an account to join the conversation.
- blackmoon
- Offline
- Posts: 402
Stunt is just another word for Idle Up, that is already mapped to FMOD.
So what do you control with AIL D/R ?
Is it pitch curves set to +-100 vs +-50 in FMOD ?
And yes the file would be appreciated
Thanks.
Please Log in or Create an account to join the conversation.
- coreire
- Topic Author
- Offline
- Posts: 16
blackmoon wrote: What do you mean by "Idle up is controlled by AILE D/R." ?
Stunt is just another word for Idle Up, that is already mapped to FMOD.
So what do you control with AIL D/R ?
Is it pitch curves set to +-100 vs +-50 in FMOD ?
And yes the file would be appreciated
Thanks.
Oops, thought I attached the file. I've attached it now.
That probably wasn't the best way to describe what Aile D/R does, I've edited it. It gives you 100% throttle output.
The pitch curves are +-50. I've set them that way for myself as I'm just learning 3d and doing so indoors.
You can change them easily if you wish by changing points 1 and 3 to -100 and +100, or if you'd like me to make any changes to suit how you like to fly let me know and I'll make you a separate file.
Please Log in or Create an account to join the conversation.
- blackmoon
- Offline
- Posts: 402
Thanks for the file.
Edit: You have this mixer, repeated in the file (I don't think it would do any arm, but one never know) :
[mixer]
src=AIL DR1
dest=Ch3
switch=AIL DR1
usetrim=0
curvetype=expo
points=0,0
Please Log in or Create an account to join the conversation.
- coreire
- Topic Author
- Offline
- Posts: 16
blackmoon wrote: I'm getting around quite well with the model files so I'll do the modifications myself, I'm just lazy and prefer to modify than doing it from scratch
Thanks for the file.
Edit: You have this mixer, repeated in the file (I don't think it would do any arm, but one never know) :
[mixer] src=AIL DR1 dest=Ch3 switch=AIL DR1 usetrim=0 curvetype=expo points=0,0
Yup, its repeated because the first was an override for the standard throttle curve. Then the FMOD 1 and 2 curves were added at a later stage and I readded it after them instead of moving everything back a page. It won't causes any issues, the first instance of it just becomes redundant.
Please Log in or Create an account to join the conversation.
- Mullson
- Offline
- Posts: 114
coreire wrote: There are 3 gyro settings, which are controlled by the Mix switch.
Mix0 - 75%
Mix1 - 50%
Mix2 - 40%
Is this by choice If so why? Isn't the translation from WK startup settings like this:
Mix0 - 50%
Mix1 - 40%
Mix2 - 0%
Don't you want to be able to turn of HH?
Thanks for the ini.
Please Log in or Create an account to join the conversation.
- coreire
- Topic Author
- Offline
- Posts: 16
Mullson wrote:
coreire wrote: There are 3 gyro settings, which are controlled by the Mix switch.
Mix0 - 75%
Mix1 - 50%
Mix2 - 40%
Is this by choice If so why? Isn't the translation from WK startup settings like this:
Mix0 - 50%
Mix1 - 40%
Mix2 - 0%
Don't you want to be able to turn of HH?
Thanks for the ini.
I tried those settings originally when I was making the setup. The 0% setting seems to disable the gyro entirely, which isn't something I wanted in my setup.
Please Log in or Create an account to join the conversation.
- Mullson
- Offline
- Posts: 114
Mine inited and I cold control everything. But when I try to bind or reinit again It just dont work? the id is reset. This is whit 7E.
Please Log in or Create an account to join the conversation.
- coreire
- Topic Author
- Offline
- Posts: 16
Mullson wrote: How is your bind proses, how do you bind and rebind?
Mine inited and I cold control everything. But when I try to bind or reinit again It just dont work? the id is reset. This is whit 7E.
I just connect battery, power on tx, put heli on level surface. I haven't been using rebind function so can't comment on that. I don't have the tx near me now but I don't think I set a fixed ID in that setup
Please Log in or Create an account to join the conversation.
- Mullson
- Offline
- Posts: 114
coreire wrote:
Mullson wrote: How is your bind proses, how do you bind and rebind?
Mine inited and I cold control everything. But when I try to bind or reinit again It just dont work? the id is reset. This is whit 7E.
I just connect battery, power on tx, put heli on level surface. I haven't been using rebind function so can't comment on that. I don't have the tx near me now but I don't think I set a fixed ID in that setup
I manage to bind it to a fixed id now. thanks for yor note.
Bind blug in then out. Restart Tx and rx. Let tx bind with heli on a leveld surface. Until the rx twitches. Then go in to model setup and deside a bind code 123123"BIND". and its finn
Please Log in or Create an account to join the conversation.
- Mullson
- Offline
- Posts: 114
The mini dens are no wonder and gives 0.1g to the outers. But I love them for the connectability.
Please Log in or Create an account to join the conversation.
- CPpilot
- Offline
- Posts: 5
Thanks
Please Log in or Create an account to join the conversation.
- domcars0
- Offline
- Posts: 390
You can pick up the model7.ini given by coreire at the beginning of this topics and put this file in the models/ directory of the USB Filesystem of your Devo7e ... (change model number modelX.ini if needed)
Devo 10 (+7e) owner. It's mine, please don't touch it with your big fingers
Please Log in or Create an account to join the conversation.
- RoGuE_StreaK
- Offline
- Posts: 486
And there's only FMOD0 and FMOD1, but that shouldn't be an issue. Also check gyro assignment.
Please Log in or Create an account to join the conversation.
- CPpilot
- Offline
- Posts: 5
Thanks.
Please Log in or Create an account to join the conversation.
- vlad_vy
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- CPpilot
- Offline
- Posts: 5
How about *.elf files? Do I need to copy those under the root drive?
Thanks,
Please Log in or Create an account to join the conversation.
- vlad_vy
- Offline
- Posts: 3333
Please Log in or Create an account to join the conversation.
- JJ1984
- Offline
- Posts: 23
Please Log in or Create an account to join the conversation.