- Posts: 588
V500D01 DEVO
- Hexperience
- Topic Author
- Offline
Less
More
21 Mar 2013 03:20 - 21 Mar 2013 03:21 #7942
by Hexperience
There are 10 types of people in this world. Those that understand binary and those that don't.
V500D01 DEVO was created by Hexperience
This is for the V500D01 with 2702v-D gyro RX.
**** This is from a DEVO 12 ****
You may need to edit the switches.
(This is a good test to see how it translates to other TX's)
Flight mode switch is for both throttle and pitch curves.
F0 - Normal
F1 - Full pitch, V throttle curve
F2 - Full pitch, almost straight throttle line
AIL and ELE rates are on the MIX switch, 60,80,100 rates. 10% expo on all, Walkera manual says 45%... edit as you like.
RUD rates 75, 100 on RUD D/R switch.
Throttle hold on HOLD switch.
Gyro on Gear switch, +65%, -65% with Gyro TRIM on the Left trim.
Also note I have a fixed ID, you may want to clear it.
**** This is from a DEVO 12 ****
You may need to edit the switches.
(This is a good test to see how it translates to other TX's)
Flight mode switch is for both throttle and pitch curves.
F0 - Normal
F1 - Full pitch, V throttle curve
F2 - Full pitch, almost straight throttle line
AIL and ELE rates are on the MIX switch, 60,80,100 rates. 10% expo on all, Walkera manual says 45%... edit as you like.
RUD rates 75, 100 on RUD D/R switch.
Throttle hold on HOLD switch.
Gyro on Gear switch, +65%, -65% with Gyro TRIM on the Left trim.
Also note I have a fixed ID, you may want to clear it.
There are 10 types of people in this world. Those that understand binary and those that don't.
Last edit: 21 Mar 2013 03:21 by Hexperience.
Please Log in or Create an account to join the conversation.
- Hexperience
- Topic Author
- Offline
Less
More
- Posts: 588
30 Apr 2013 21:30 #9420
by Hexperience
There are 10 types of people in this world. Those that understand binary and those that don't.
Replied by Hexperience on topic V500D01 DEVO
By the way, to clear the fixed ID on a 2702v-d you need to power up the RX while you have the GEAR signal pin grounded. I.E. Top pin to bottom pin type bind plug on the gear channel. Power it up, it will flash slow. Then power down, remove the plug and power it up while the TX is binding.
Cheers
Cheers
There are 10 types of people in this world. Those that understand binary and those that don't.
Please Log in or Create an account to join the conversation.
Time to create page: 0.034 seconds
- Home
- Forum
- Model Configs, Templates, Skins
- Model Configs
- V500D01 DEVO