Trex 500 FBL & Mini Vbar Config, please help...

Hi to all brothers,

I am be getting a good deal of Trex 500 with Mini Vbar from my friend. I can't seem to find any good and suitable config for the above set-up.

Can anyone please help and give me a suitable config?

This is my very FIRST BIG heli... I need a suitable config... I am not expert and it is still pretty new with heli and deviation program..

What receiver will you be using?

Hi sir, I will be using Rx 802 with Devo 10 Deviation v3

Is there any better or suitable Rx for my application?

Looking forward hearing from you soon. Thank you.

Guys, please enlighten if you have any info and tips for the set-up...

Just use the helicopter template, and use the Vbar SW to set it up.

www.deviationtx.com/forum/how-to/1226-ho...s-on-custom-firmware

Bro clearprop, which are the correct proper template for FBL Trex 500?

Bro Hex, the link you posted help me to understand more how FBL system work.

I understand that I will be using Devo Rx802 receiver with the Mini Vbar gyro to fly the Trex500.

Basically i can set up a new Heli model with "NO" mixed thingy on all the channels?

If only there is a similar template that is suitable to let me run my set-up.

Load a new model.
Choose HELI for model type
Select Swashtype to NONE
receiver type to DEVO
Set your mixers up however you like them
Then you need to run your Vbar setup

Hope this helps.I have a Trex 500 with a Robird and it flies great.

Hi sir, created the model file is straight forward enough. Do you have any tips or advice on the value to set on throttle curve and pitch curve?