Syma X1 model and icon

Used a posting of a Hubsan X4 model as a starting point, and the icon is from a zip file someone posted here. Will add credits if I can find them again. Icon is for Devo7e/10.

Fmode0: very gentle
Fmode1: about the same as stock tx high rate
Fmode2: aggressive
Sticky throttle cut on Rudder DR1
Auto-flip enable on Trim_R- (Devo10, next to mix switch). Hold down, then cyclic in direction to flip. It's a momentary switch set up according to the directions in the manual.

you will also have the settings for syma x5C?

wim62 wrote: you will also have the settings for syma x5C?

I don't have that model. The X5C transmitter looks exactly like an X1 transmitter - have you tried binding using this model?

I see in your description that the icon is for the 7e/10 but would the model file work with a7e? Thank in advance arms and thank you for sharing.

How can I add a 2nd timer to the x1?
Wim gr

How can I get the aggressive mod if I have devo 7e that only has two, two position switches ?