Alienwii/lemon rx config wanted (Devo 7e)

Is there such a file/ini ???....

I'm building a micro quad with Alienwii/lemon rx

I'm using the Devo 7e deviation 4.01 nightly...

Any advice would be greatly appreciated, many thanks in advance...

I don't use any model file, just start a new one.

Pick DSM2 protocol.
Reverse AIL & RUD.
Add bind plug on AlienWii board, power up.
Hit "Bind" in Deviation model config, wait a couple of seconds for solid Rx light
Power down alienwii, remove bind plug

That's it..

Great Thank you ohhorob, 1st post a helping post too I am honoured, Thank you!!....

I'll give your advice a go when my lemon rx turns up, cheers

mxer125 wrote: Is there such a file/ini ???....

I'm building a micro quad with Alienwii/lemon rx

I'm using the Devo 7e deviation 4.01 nightly...

Any advice would be greatly appreciated, many thanks in advance...

Find attached the model file I have developed to fly picnic quads 120 frame with alienWii/lemonRx with Devo 10. Still a work in progress, haven't got the display icons for switches and such sorted out, but it will get you flying nicely.

Arm Motors:
Gear 1 = motors disarmed
Gear 0 = motors Armed

Gimbal Rates (rudder, aileron, elevator):
Rudd D/R 1 = 60%
Rudd D/R 0 = 100%

Flight Mode:
Mix 2 = Acro mode (gyro only...not self leveling)
Mix 1= Angle mode
Mix 0 = Horizon Mode

Mike