Activate a 3 Point Swich,.T8SG V2 Plus

Hello

Sorry for my English. I am from Switzerland. Anyone speak or write German?

I would activate the 3Way Switch A. Now i have the Problem the Switch is in Position A1 on -100% in Position A0 on 100% and in Position A2 on -100%
I want Programm A1= 100%....A0= 0%...A2= -100%
Can anyone help mi.

Greetz from Switzerland
Roman

Ahhh i have the Jumper T8SG V2

Go to Mixer and scroll down to the channel A0 is on. (CH5?)

Should say SIMPLE - selct SIMPLE and hit ENT
Down arrow to Select the Switch SRC (SW A0)
Push ENT - this should reverse the switch

Should show as !SW A0
Expo 0

I need to activate a 3 point switch with the three flight modes on my SAFE receiver. Beginner, intermediate, experienced. I have channel 5 on toggle A. I also need to program a two position switch for auto recovery, or on-off for channel 6. Presently Ch6 is on toggle H so it is next to toggle A. Can you help?

Roterbaronsz wrote: Hello

Sorry for my English. I am from Switzerland. Anyone speak or write German?

I would activate the 3Way Switch A. Now i have the Problem the Switch is in Position A1 on -100% in Position A0 on 100% and in Position A2 on -100%
I want Programm A1= 100%....A0= 0%...A2= -100%
Can anyone help mi.

Greetz from Switzerland
Roman

This Youtube video is the best. It helped me set up the switches. Haven't tested it out yet, but I am hopeful.