- Posts: 2
Activate a 3 Point Swich,.T8SG V2 Plus
- Roterbaronsz
- Topic Author
- Offline
Less
More
07 Dec 2018 12:10 #72002
by Roterbaronsz
Activate a 3 Point Swich. was created by Roterbaronsz
Hello
Sorry for my English. I am from Switzerland. Anyone speak or write German?
I would activate the 3Way Switch A. Now i have the Problem the Switch is in Position A1 on -100% in Position A0 on 100% and in Position A2 on -100%
I want Programm A1= 100%....A0= 0%...A2= -100%
Can anyone help mi.
Greetz from Switzerland
Roman
Sorry for my English. I am from Switzerland. Anyone speak or write German?
I would activate the 3Way Switch A. Now i have the Problem the Switch is in Position A1 on -100% in Position A0 on 100% and in Position A2 on -100%
I want Programm A1= 100%....A0= 0%...A2= -100%
Can anyone help mi.
Greetz from Switzerland
Roman
Please Log in or Create an account to join the conversation.
- Roterbaronsz
- Topic Author
- Offline
Less
More
- Posts: 2
07 Dec 2018 12:28 #72003
by Roterbaronsz
Replied by Roterbaronsz on topic Activate a 3 Point Swich.
Ahhh i have the Jumper T8SG V2
Please Log in or Create an account to join the conversation.
- Brett_N
- Offline
Less
More
- Posts: 53
23 Dec 2018 15:29 #72102
by Brett_N
Replied by Brett_N on topic Activate a 3 Point Swich.
Go to Mixer and scroll down to the channel A0 is on. (CH5?)
Should say SIMPLE - selct SIMPLE and hit ENT
Down arrow to Select the Switch SRC (SW A0)
Push ENT - this should reverse the switch
Should show as !SW A0
Expo 0
Should say SIMPLE - selct SIMPLE and hit ENT
Down arrow to Select the Switch SRC (SW A0)
Push ENT - this should reverse the switch
Should show as !SW A0
Expo 0
Please Log in or Create an account to join the conversation.
- Ultracon
- Offline
Less
More
- Posts: 35
04 Feb 2019 05:07 #72702
by Ultracon
Replied by Ultracon on topic Activate a 3 Point Swich,.T8SG V2 Plus
I need to activate a 3 point switch with the three flight modes on my SAFE receiver. Beginner, intermediate, experienced. I have channel 5 on toggle A. I also need to program a two position switch for auto recovery, or on-off for channel 6. Presently Ch6 is on toggle H so it is next to toggle A. Can you help?
Please Log in or Create an account to join the conversation.
- Ultracon
- Offline
Less
More
- Posts: 35
24 Feb 2019 05:38 #72998
by Ultracon
This Youtube video is the best. It helped me set up the switches. Haven't tested it out yet, but I am hopeful.
Replied by Ultracon on topic Activate a 3 Point Swich.
Roterbaronsz wrote: Hello
Sorry for my English. I am from Switzerland. Anyone speak or write German?
I would activate the 3Way Switch A. Now i have the Problem the Switch is in Position A1 on -100% in Position A0 on 100% and in Position A2 on -100%
I want Programm A1= 100%....A0= 0%...A2= -100%
Can anyone help mi.
Greetz from Switzerland
Roman
This Youtube video is the best. It helped me set up the switches. Haven't tested it out yet, but I am hopeful.
Please Log in or Create an account to join the conversation.
Time to create page: 0.044 seconds
- Home
- Forum
- Model Configs, Templates, Skins
- Model Configs
- Activate a 3 Point Swich,.T8SG V2 Plus