×

Notice

The forum is in read only mode.

Walkera QR Ladybird

More
17 Sep 2012 15:53 - 07 Jan 2013 10:51 #1683 by vlad_vy
Walkera QR Ladybird was created by vlad_vy
For Deviation 8S, protocol Devo. Flight Modes and Throttle Hold(via the 'RUDD DR' switch).

FMode1 - indoor 2D (6-axis)
FMode2 - outdoor, more aggressive 2D (6-axis)
FMode3 - outdoor, 3D (3-axis)

Trottle curves for hovering at about 50% throttle.

File Attachment:

File Name: Ladybird.ini
File Size:2 KB


Attachments:
Last edit: 07 Jan 2013 10:51 by vlad_vy.
More
09 Dec 2012 09:04 #3807 by RugWarrior
Replied by RugWarrior on topic Walkera QR Ladybird
Hi.

Can someone please upgrade this to version 2 of Deviation TX?

I heard that something changed but I have no clue how to do it on my own...

But I love this project!
More
09 Dec 2012 09:22 - 07 Jan 2013 10:52 #3808 by vlad_vy
Replied by vlad_vy on topic Walkera QR Ladybird
Nothing special for Deviation 2.00, only added telemetry battery voltage alarm.

File Attachment:

File Name: Ladybird_2...1-07.ini
File Size:2 KB
Attachments:
Last edit: 07 Jan 2013 10:52 by vlad_vy.
More
09 Dec 2012 11:41 #3814 by RugWarrior
Replied by RugWarrior on topic Walkera QR Ladybird
Thank you very much!
More
11 Dec 2012 16:45 #3882 by vlad_vy
Replied by vlad_vy on topic Walkera QR Ladybird
Use 'Fixed ID'!!! Apply bind and Fixed ID at level surface and zero trimms. I discovered that in time of each auto-bind Ladybird compensate any existing trimming. You can trimm it endlessly.
More
11 Dec 2012 21:58 #3895 by RugWarrior
Replied by RugWarrior on topic Walkera QR Ladybird
Thank you for this hint!
More
21 Jan 2013 10:06 #5300 by ferreret
Replied by ferreret on topic Walkera QR Ladybird
I used the configuration for my Walkera Ladybird V2,with 2.0 version and is running perfect!

Thank you very much!
More
28 Jan 2013 18:51 #5652 by Rambosmurf
Replied by Rambosmurf on topic Walkera QR Ladybird
Works better than factory on Devo 10. Great job.
Time to create page: 0.403 seconds
Powered by Kunena Forum