Hi zeesh, copy this section into a copy of your modelx.ini (model(x+1).ini. If you set the range for all channels to 125 % (1000 µs - 2000 µs instead of 1100 µs - 1900 µs) the 6 mixer results should fit nicely into the middle of each segment.
[channel5]
template=complex
[mixer]
src=SW E1
dest=Ch5
switch=SW D0
scalar=21
offset=-82
usetrim=0
curvetype=min/max
points=0
[mixer]
src=SW E0
dest=Ch5
switch=SW D1
scalar=21
usetrim=0
curvetype=min/max
points=0
[mixer]
src=SW E1
dest=Ch5
switch=SW D2
scalar=21
offset=82
usetrim=0
curvetype=min/max
points=0
